Operating instructions/Installation instructions

Cleaning and care
98
Descale
The frequency of descaling will depend
on the water hardness level in your
area.
The descaling process can be run at
any time.
However, to ensure that the oven
functions correctly, you will be
automatically prompted to run the
descaling process for the steam
injection system after a certain number
of cooking processes.
The oven will count down in the display
the last 10 cooking processes that can
be run before it needs to be descaled.
You will then not be able to run any
operating mode or automatic
programme using moisture assistance.
These operating modes can only be
used again after you have carried out a
descaling process. All other operating
modes and automatic programmes
without moisture assistance can still be
used.
Descaling process sequence
Once the descaling process has been
started it must be completed through
to the end. It cannot be cancelled.
Descaling takes approx. 90minutes and
consists of several steps:
1. Preparing the descaling process
2. Drawing in the descaling solution
3. Activation phase
4. Rinse 1
5. Rinse 2
6. Rinse 3
7. Residual water evaporation