Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and safety instructions
- Caring for the environment
- Guide to the appliance
- Controls
- Using the appliance
- Features
- Before using for the first time
- Settings
- Alarm + minute minder
- M Chef
- Main and sub-menus
- Suitable cookware for M Chef functions
- Energy saving tips
- Operation
- Functions using moisture
- Automatic programmes
- Special applications
- User programmes
- MyMiele
- Baking
- Roasting
- Grilling
- Cleaning and care
- Problem solving guide
- Service
- Installation
- Cooking charts
- Gourmet Assistant overview
- Overview of Automatic programmes
- Conformity declaration
- Copyright and licences
Before using for the first time
31
Basic settings
The following settings must be made
before starting up for the first time. You
can change these settings again at a
later time (see “Settings”).
Risk of injury caused by hot
surfaces.
The Dialog oven gets hot when it is
being used.
For safety reasons, the Dialog oven
may only be used when it has been
fully installed.
The Dialog oven will switch on
automatically when it is connected to
the electricity supply.
Setting the language
Select the desired language.
If you have selected the wrong
language by mistake, proceed as
described in “Settings – Language”.
Setting the location
Select the required location.
Setting the date
Set the day, then the month, and
finally the year.
Confirm withOK.
Setting the time
Set the time of day in hours and
minutes.
Confirm withOK.
Completing the commissioning
process
Follow any further instructions in the
display.
The oven is now ready for use.