Safety data sheet

according to 29 CFR 1910.1200(g)
Safety Data Sheet
ProCare Shine 40
Revision date: 15.06.2018 Product code: Page 4 of 9
Breakthrough time >= 8 h
PVC (Polyvinyl chloride). - Thickness of the glove material 0,5 mm
Breakthrough time >= 8 h
The selected protective gloves should satisfy the specifications of standards like EN 374.
Before using check leak tightness / impermeability. In the case of wanting to use the gloves again, clean them
before taking off and air them well.
Suitable protective clothing: Lab apron.
Skin protection
With correct and proper use, and under normal conditions, breathing protection is not required.
Respiratory protection necessary at:
-Exceeding exposure limit values
-Insufficient ventilation. and aerosol or mist formation
Suitable respiratory protective equipment: Particulate Respirators, Standard: 42 CFR Part 84 or DIN 143. Type:
R/N/P-95/99/100
The filter class must be suitable for the maximum contaminant concentration (gas/vapour/aerosol/particulates)
that may arise when handling the product. If the concentration is exceeded, self-contained breathing apparatus
must be used.
Respiratory protection
No special precautionary measures are necessary.
Environmental exposure controls
colourless
liquid
Physical state:
Color:
Information on basic physical and chemical properties
9. Physical and chemical properties
characteristic
Odor:
pH-Value:
< 7
Changes in the physical state
~0 °CMelting point/freezing point:
~100 °CInitial boiling point and boiling range:
not determined
Sublimation point:
not determined
Softening point:
not determined
Pour point:
>100 °CFlash point:
Sustaining combustion:
Not sustaining combustion
none
Explosive properties
not determined
Lower explosion limits:
not determined
Upper explosion limits:
not determined
Ignition temperature:
Auto-ignition temperature
not determined
Gas:
not determined
Decomposition temperature:
none
Oxidizing properties
Vapor pressure:
not determined
Density (at 20 °C): 1,0 g/cm³
Water solubility:
miscible.
Print date: 10.03.2020USA - ENRevision No: 2,0