Safety data sheet

according to 29 CFR 1910.1200(g)
Safety Data Sheet
ProCare Shine 40
Revision date: 15.06.2018 Product code: Page 3 of 9
Personal protection equipment: see section 8
Disposal: see section 13
7. Handling and storage
Precautions for safe handling
Wear suitable protective clothing. See section 8.
Do not breathe vapour/aerosol.
Advice on safe handling
Usual measures for fire prevention.
Advice on protection against fire and explosion
General protection and hygiene measures: refer to chapter 8
Further information on handling
Conditions for safe storage, including any incompatibilities
Keep container tightly closed in a cool, well-ventilated place.
Requirements for storage rooms and vessels
Do not store together with: Explosives. Oxidizing solids. Oxidizing liquids. Radioactive substances. Infectious
substances. Food and animal feedingstuff.
Hints on joint storage
Keep the packing dry and well sealed to prevent contamination and absorbtion of humidity.
Recommended storage temperature: 20°C
Protect against: frost. UV-radiation/sunlight. heat. Humidity
Further information on storage conditions
8. Exposure controls/personal protection
Control parameters
The following constituents are the only constituents of the product which have a PEL, TLV or other
recommended exposure limit. At this time, the other constituents have no known exposure limits.
Additional advice on limit values
Exposure controls
No special measures are necessary.
Appropriate engineering controls
Always close containers tightly after the removal of product. When using do not eat, drink, smoke, sniff. Wash
hands before breaks and after work.
Protective and hygiene measures
Wear safety glasses; chemical goggles (if splashing is possible). Standards: EN 166 or 29 CFR 1910.133
Eye/face protection
Wear suitable gloves.
Suitable material:
FKM (fluororubber). - Thickness of the glove material 0,4 mm
Breakthrough time >= 8 h
Butyl rubber. - Thickness of the glove material 0,5 mm
Breakthrough time >= 8 h
CR (polychloroprenes, Chloroprene rubber). - Thickness of the glove material 0,5 mm
Breakthrough time >= 8 h
NBR (Nitrile rubber). - Thickness of the glove material 0,35 mm
Hand protection
Print date: 10.03.2020USA - ENRevision No: 2,0