Safety data sheet

according to 29 CFR 1910.1200(g)
Safety Data Sheet
Miele, Inc.
ProCare Shine 40
Revision date: 11/24/2022 Product code: Page 5 of 10
not determined
Lower explosion limits:
not determined
Upper explosion limits:
not determined
Auto-ignition temperature:
Self-ignition temperature
not determined
Gas:
not determined
Decomposition temperature:
pH-Value:
< 7
Viscosity / dynamic:
not determined
Viscosity / kinematic:
not determined
Flow time:
not determined
Water solubility:
miscible.
Solubility in other solvents
not determined
SECTION 12: Ecological information
Partition coefficient n-octanol/water:
Vapor pressure:
not determined
Density (at 20 °C): 1,0 g/cm³
Relative vapour density:
not determined
Other information
Information with regard to physical hazard classes
Sustaining combustion:
Not sustaining combustion
none
Oxidizing properties
Other safety characteristics
not determined
Solvent separation test:
not determined
Solvent content:
9,50 %
Solid content:
Evaporation rate:
not determined
Further Information
No information available.
10. Stability and reactivity
Reactivity
No information available.
Chemical stability
Stability:
Stable
The product is chemically stable under recommended conditions of storage, use and temperature.
Possibility of hazardous reactions
Hazardous reactions:
Will not occur
No information available.
Keep away from heat.
Conditions to avoid
Oxidising agent, strong. Alkalis (alkalis). Reducing agents, strong. Hazardous substances that release
flammable gases when in contact with water.
Incompatible materials
Print date: 11/24/2022 USA - ENRevision No: 2,1