Safety data sheet

according to 29 CFR 1910.1200(g)
Safety Data Sheet
Miele, Inc.
ProCare Shine 40
Revision date: 11/24/2022 Product code: Page 4 of 10
Individual protection measures, such as personal protective equipment
Wear safety glasses; chemical goggles (if splashing is possible). Standards: EN 166 or 29 CFR 1910.133
Eye/face protection
Wear suitable gloves.
Suitable material:
FKM (fluororubber). - Thickness of the glove material 0,4 mm
Breakthrough time >= 8 h
Butyl rubber. - Thickness of the glove material 0,5 mm
Breakthrough time >= 8 h
CR (polychloroprenes, Chloroprene rubber). - Thickness of the glove material 0,5 mm
Breakthrough time >= 8 h
NBR (Nitrile rubber). - Thickness of the glove material 0,35 mm
Breakthrough time >= 8 h
PVC (Polyvinyl chloride). - Thickness of the glove material 0,5 mm
Breakthrough time >= 8 h
For special purposes, it is recommended to check the resistance to chemicals of the protective gloves
mentioned above together with the supplier of these gloves.
The selected protective gloves should satisfy the specifications of standards like EN 374.
Before using check leak tightness / impermeability. In the case of wanting to use the gloves again, clean them
before taking off and air them well.
Hand protection
Suitable protective clothing: Lab apron.
Skin protection
With correct and proper use, and under normal conditions, breathing protection is not required.
Respiratory protection necessary at:
-Exceeding exposure limit values
-Insufficient ventilation and aerosol or mist formation
Suitable respiratory protective equipment: Particulate Respirators, Standard: 42 CFR Part 84 or DIN 143. Type:
R/N/P-95/99/100
The filter class must be suitable for the maximum contaminant concentration (gas/vapour/aerosol/particulates)
that may arise when handling the product. If the concentration is exceeded, self-contained breathing apparatus
must be used.
Respiratory protection
No special precautionary measures are necessary.
Environmental exposure controls
liquid
Physical state:
Information on basic physical and chemical properties
9. Physical and chemical properties
Color: colourless
characteristic
Odor:
Changes in the physical state
~0 °CMelting point/freezing point:
~100 °CBoiling point or initial boiling point and
boiling range:
not determined
Sublimation point:
not determined
Softening point:
not determined
Pour point:
>100 °CFlash point:
none
Explosive properties
Print date: 11/24/2022 USA - ENRevision No: 2,1