Safety data sheet

according to 29 CFR 1910.1200(g)
Safety Data Sheet
Miele, Inc.
ProCare Shine 40
Revision date: 11/24/2022 Product code: Page 3 of 10
Methods and material for containment and cleaning up
Absorb with liquid-binding material (e.g. sand, diatomaceous earth, acid- or universal binding agents).
Treat the recovered material as prescribed in the section on waste disposal.
For containment
Clean contaminated objects and areas thoroughly observing environmental regulations.
For cleaning up
Safe handling: see section 7
Personal protection equipment: see section 8
Disposal: see section 13
Reference to other sections
7. Handling and storage
Precautions for safe handling
Wear suitable protective clothing. See section 8.
Do not breathe vapor or spray.
Advice on safe handling
Usual measures for fire prevention.
Advice on protection against fire and explosion
Always close containers tightly after the removal of product. Do not eat, drink, smoke or sneeze at the
workplace. Wash hands before breaks and after work.
Advice on general occupational hygiene
General protection and hygiene measures: See section 8.
Further information on handling
Conditions for safe storage, including any incompatibilities
Keep container tightly closed in a cool, well-ventilated place.
Requirements for storage rooms and vessels
Do not store together with: Explosives. Oxidizing solids. Oxidizing liquids. Radioactive substances. Infectious
substances. Food and animal feedingstuff.
Hints on joint storage
Keep the packing dry and well sealed to prevent contamination and absorbtion of humidity.
Recommended storage temperature: 20°C
Protect against: frost. UV-radiation/sunlight. heat. Humidity
Further information on storage conditions
8. Exposure controls/personal protection
Control parameters
The following constituents are the only constituents of the product which have a PEL, TLV or other
recommended exposure limit. At this time, the other constituents have no known exposure limits.
Additional advice on limit values
Exposure controls
Technical measures and the application of suitable work processes have priority over personal protection
equipment.
Provide adequate ventilation.
Appropriate engineering controls
Print date: 11/24/2022 USA - ENRevision No: 2,1