User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Guide to the machine
- Unpacking and installing
- Operation
- Before using for the first time
- Bean system
- Filling the water container
- Switching on and off
- Spout adjustment
- Cup heating
- Making coffee with and without milk
- Making coffee with milk
- Tea
- Dispensing hot water
- Parameters
- Portion size
- Resetting drinks
- Profiles
- Profiles: creating and processing drinks
- Profiles: making drinks
- Expert mode
- Settings
- Networking
- Cleaning and care
- Overview of cleaning intervals
- Cleaning by hand or in the dishwasher
- Unsuitable cleaning agents
- Clean the drip tray and waste container
- Cleaning the drip tray cover
- Cleaning the water container
- Removing and cleaning the water container filter
- Cleaning the central spout with integrated Cappuccinatore
- Removing and cleaning the cup sensor
- Cleaning the milk siphon
- Cleaning the milk flask
- Cleaning the milk pipework manually or using the maintenance programme
- Cleaning the bean system
- Ground coffee drawer cleaning
- Vacuuming out the ground coffee chute
- Cleaning the casing
- Maintenance programmes
- Rinsing the machine
- Rinsing the milk pipework
- Cleaning the milk pipework
- Degreasing the brew unit and cleaning the interior
- Descaling the machine
- Automatic descaling
- Problem solving guide
- Service
- Transporting the machine
- Accessories
- Saving energy
- Electrical connection
- Dimensions
- Technical data
- EU Conformity declaration
- UK Conformity declaration
Problem solving guide
96
Faults with automatic descaling
Problem Cause and remedy
After switching on, a
message appears in-
forming you that auto-
matic descaling could
not be carried out.
If you have made drinks with milk, the milk tube must
be pushed into the drip tray and when the machine is
switched off, the message about this in the display
confirmed with OK.
All removable parts, such as the water container, drip
tray, brew unit or central spout must be fitted.
The water container must be filled with water at least
up to the descaling symbol.
The machine door was not closed.
Confirm the message with OK.
Make sure that the coffee machine is ready to use
before the next descaling process.
The coffee machine was not switched off at the start
time using the On/Off sensor.
The coffee machine pipework will only be filled with
descaling solution when the coffee machine is
switched off.
Confirm the message with OK.
Change the start time if neccesary.
Descale appliance manually
appears in the display
even though a descal-
ing cartridge which is
ready to use is fitted.
Drinks cannot be made.
Depending on the water hardness level in your area
and your usage behaviour, the coffee machine needs
to be descaled using the maintenance programme
occasionally.
For this you will need to use Miele descaling tablets.
Descale the coffee machine using the
maintenance programme (see “Cleaning and care -
Descaling the appliance”).