User manual

Automatic descaling
86
The cap is located on the cartridge.
Release it by snapping it off.
 Dispose of the spent cartridge with
your household waste.
Fit the descaling cartridge
 Insert the cartridge and push it
upwards as far as it will go.
 Push the cartridge holder back
and then close the cover.
 Follow the instructions in the display.
The next time the coffee machine is
switched off, the descaling cartridge
will also fill with water when the
machine is rinsed. You will hear water
being pumped into the cartridge at
frequent intervals.
If you do not want to fit a descaling
cartridge, the system must be sealed
with the plug. Messages such as “Fit a
new descaling cartridge” will be not
displayed.
 Insert the adapter in place of the
cartridge.
Set the start time for automatic
descaling (Descaling timer)
You can set the daily start time for
automatic descaling as you wish. The
coffee machine must be switched off
for the duration of the activation phase
(approx.4hours).
Start in the Drinks menu.
 Touch .
 Select Settings  and then Timer.
 Select Descaling timer.
 Set the start time you want and
touchOK.
The start time is saved. From now on
automatic descaling will commence at
the desired time each day.
Cancelling automatic
descaling
You can cancel automatic descaling
during the activation phase.
Automatic descaling can be cancelled
as often as you like. You would then
need to descale the coffee machine
using the descaling tablets (see
“Cleaning and care - Descaling the
appliance”).
 Touch the On/Off sensor.
The time left in hours is shown in the
display.
 Touch Cancel.
The descaling solution is rinsed out of
the pipework. Rinsing can take up to
5minutes. You can make drinks
afterwards.