User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Guide to the machine
- Unpacking and installing
- Operation
- Before using for the first time
- Bean system
- Filling the water container
- Switching on and off
- Spout adjustment
- Cup heating
- Making coffee with and without milk
- Making coffee with milk
- Tea
- Dispensing hot water
- Parameters
- Portion size
- Resetting drinks
- Profiles
- Profiles: creating and processing drinks
- Profiles: making drinks
- Expert mode
- Settings
- Networking
- Cleaning and care
- Overview of cleaning intervals
- Cleaning by hand or in the dishwasher
- Unsuitable cleaning agents
- Clean the drip tray and waste container
- Cleaning the drip tray cover
- Cleaning the water container
- Removing and cleaning the water container filter
- Cleaning the central spout with integrated Cappuccinatore
- Removing and cleaning the cup sensor
- Cleaning the milk siphon
- Cleaning the milk flask
- Cleaning the milk pipework manually or using the maintenance programme
- Cleaning the bean system
- Ground coffee drawer cleaning
- Vacuuming out the ground coffee chute
- Cleaning the casing
- Maintenance programmes
- Rinsing the machine
- Rinsing the milk pipework
- Cleaning the milk pipework
- Degreasing the brew unit and cleaning the interior
- Descaling the machine
- Automatic descaling
- Problem solving guide
- Service
- Transporting the machine
- Accessories
- Saving energy
- Electrical connection
- Dimensions
- Technical data
- EU Conformity declaration
- UK Conformity declaration
Cleaning and care
81
number of drinks that can be made
before descaling will show in the
display after each drink.
Confirm the message with OK.
When the number of remaining portions
reaches 0, the coffee machine will lock
out.
Descale the machine will appear in the
display.
You can switch the coffee machine off if
you do not want to carry out the
descaling programme at this point in
time. You can not make any drinks until
the machine has been descaled.
Descaling after prompt appears in
the display
Descale the machine appears in the
display.
Descaling cannot be cancelled once it
has started. It must be completed
through to the end.
Touch OK.
The process will start.
Follow the instructions in the display.
When Fill the water container to the
symbol with descaling agent and lukewarm
water and place it in the machine. appears
in the display, proceed as follows.
Preparing the descaling solution
For optimum descaling results, we
recommend using the Miele descaling
tablets provided.
The descaling tablets have been
specially developed for Miele coffee
machines.
Other descalers, which contain other
acids besides citric acid and/or other
undesirable substances, such as
chlorides for example, can cause
damage to the product. Moreover,
the descaling result required cannot
be guaranteed if the descaling
solution was not of the appropriate
concentration.
Miele descaling tablets are available to
order via the Miele webshop, from the
Miele Customer Service Department
(see the end of this booklet for contact
details) or from your Miele dealer.
Fill the water container to the
descaling symbol with lukewarm
water.
Place 1 descaling tablet in the water.
Follow the instructions for the mixing
ratio carefully. It is important to fill
the water container with the correct
amount of water. Otherwise the
descaling process will be cancelled
prematurely.
Carrying out descaling
Push the water container back into
the appliance.