User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Guide to the machine
- Unpacking and installing
- Operation
- Before using for the first time
- Bean system
- Filling the water container
- Switching on and off
- Spout adjustment
- Cup heating
- Making coffee with and without milk
- Making coffee with milk
- Tea
- Dispensing hot water
- Parameters
- Portion size
- Resetting drinks
- Profiles
- Profiles: creating and processing drinks
- Profiles: making drinks
- Expert mode
- Settings
- Networking
- Cleaning and care
- Overview of cleaning intervals
- Cleaning by hand or in the dishwasher
- Unsuitable cleaning agents
- Clean the drip tray and waste container
- Cleaning the drip tray cover
- Cleaning the water container
- Removing and cleaning the water container filter
- Cleaning the central spout with integrated Cappuccinatore
- Removing and cleaning the cup sensor
- Cleaning the milk siphon
- Cleaning the milk flask
- Cleaning the milk pipework manually or using the maintenance programme
- Cleaning the bean system
- Ground coffee drawer cleaning
- Vacuuming out the ground coffee chute
- Cleaning the casing
- Maintenance programmes
- Rinsing the machine
- Rinsing the milk pipework
- Cleaning the milk pipework
- Degreasing the brew unit and cleaning the interior
- Descaling the machine
- Automatic descaling
- Problem solving guide
- Service
- Transporting the machine
- Accessories
- Saving energy
- Electrical connection
- Dimensions
- Technical data
- EU Conformity declaration
- UK Conformity declaration
Cleaning and care
76
Rinsing the machine
After a coffee has been dispensed, the
machine is rinsed before it switches off.
This removes any residual coffee.
You can also rinse the milk pipework
manually.
Start in the Drinks menu.
Touch.
Select Maintenance and then Rinse the
machine.
You may also be prompted to insert the
end of the milk tube into the drip tray.
Rinsing the milk pipework
The milk pipework can become blocked
by milk residues. The milk pipework
should therefore be rinsed regularly. If a
drink has been made using milk, the
prompt to place the milk pipework into
the drip tray will appear at the latest
when you switch the machine off.
You can also rinse the milk pipework
manually.
Start in the Drinks menu.
Tip: Place a suitable container
underneath the central spout.
Touch .
Select Maintenance and then Rinse the
milk pipework.
Place the end of the milk tube into
the aperture in the drip tray cover.
Confirm withOK.
The milk pipework will now be rinsed.