User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Guide to the machine
- Unpacking and installing
- Operation
- Before using for the first time
- Bean system
- Filling the water container
- Switching on and off
- Spout adjustment
- Cup heating
- Making coffee with and without milk
- Making coffee with milk
- Tea
- Dispensing hot water
- Parameters
- Portion size
- Resetting drinks
- Profiles
- Profiles: creating and processing drinks
- Profiles: making drinks
- Expert mode
- Settings
- Networking
- Cleaning and care
- Overview of cleaning intervals
- Cleaning by hand or in the dishwasher
- Unsuitable cleaning agents
- Clean the drip tray and waste container
- Cleaning the drip tray cover
- Cleaning the water container
- Removing and cleaning the water container filter
- Cleaning the central spout with integrated Cappuccinatore
- Removing and cleaning the cup sensor
- Cleaning the milk siphon
- Cleaning the milk flask
- Cleaning the milk pipework manually or using the maintenance programme
- Cleaning the bean system
- Ground coffee drawer cleaning
- Vacuuming out the ground coffee chute
- Cleaning the casing
- Maintenance programmes
- Rinsing the machine
- Rinsing the milk pipework
- Cleaning the milk pipework
- Degreasing the brew unit and cleaning the interior
- Descaling the machine
- Automatic descaling
- Problem solving guide
- Service
- Transporting the machine
- Accessories
- Saving energy
- Electrical connection
- Dimensions
- Technical data
- EU Conformity declaration
- UK Conformity declaration
Cleaning and care
73
The milk pipework must be cleaned at
least once a week. A message in the
display will prompt you when this needs
to be done.
Confirm the message with OK.
When you confirm the message Clean
the milk pipework with OK, the internal
counter for the cleaning interval will be
reset. You will not be reminded again.
There are two options for cleaning the
milk pipework:
- You can remove and dismantle the
central spout with its integrated
cappuccinatore and either wash it in
the dishwasher or by hand with warm
water and a little washing-up liquid
(see “Cleaning the central spout with
integrated cappuccinatore”).
- Or you can clean the milk pipework
using the Clean the milk pipework
maintenance programme together
with the Miele Cleaning agent for milk
pipework (see “Cleaning the milk
pipework”).
Tip: In addition to your weekly cleaning
routine we recommend carrying out the
alternative cleaning procedure once a
month. For example if you manually
clean the machine once a week, then
you should run the maintenance
programme once a month. This
combination will ensure optimum
cleaning of the milk pipework.
Cleaning the bean system
Danger of injury on the moving
grinder!
If you reach into the grinder or
objects such as a spoon are left in
the grinder and a grinding process is
unintentionally started, you could be
injured.
Switch off the machine and
disconnect it from the power supply
before cleaning the bean system.
Coffee beans contain oils which can
deposit on the walls of the bean
containers and hinder the flow of the
beans. Therefore, clean the bean
containers regularly with a soft cloth.
If required, you can clean the lids of the
bean containers by hand with warm
water and a little washing-up liquid. Dry
the lids thoroughly before refitting them
on the bean containers.
Remove the lid of each bean
container.
Remove any coffee beans.
Tip: Use a vacuum cleaner to remove
any coffee residues from the bean
containers.
Clean the bean container with a dry,
soft cloth.
You cannot remove the finger
protection grille.
Refit the lids.
The bean containers can now be refilled
individually.