User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Guide to the machine
- Unpacking and installing
- Operation
- Before using for the first time
- Bean system
- Filling the water container
- Switching on and off
- Spout adjustment
- Cup heating
- Making coffee with and without milk
- Making coffee with milk
- Tea
- Dispensing hot water
- Parameters
- Portion size
- Resetting drinks
- Profiles
- Profiles: creating and processing drinks
- Profiles: making drinks
- Expert mode
- Settings
- Networking
- Cleaning and care
- Overview of cleaning intervals
- Cleaning by hand or in the dishwasher
- Unsuitable cleaning agents
- Clean the drip tray and waste container
- Cleaning the drip tray cover
- Cleaning the water container
- Removing and cleaning the water container filter
- Cleaning the central spout with integrated Cappuccinatore
- Removing and cleaning the cup sensor
- Cleaning the milk siphon
- Cleaning the milk flask
- Cleaning the milk pipework manually or using the maintenance programme
- Cleaning the bean system
- Ground coffee drawer cleaning
- Vacuuming out the ground coffee chute
- Cleaning the casing
- Maintenance programmes
- Rinsing the machine
- Rinsing the milk pipework
- Cleaning the milk pipework
- Degreasing the brew unit and cleaning the interior
- Descaling the machine
- Automatic descaling
- Problem solving guide
- Service
- Transporting the machine
- Accessories
- Saving energy
- Electrical connection
- Dimensions
- Technical data
- EU Conformity declaration
- UK Conformity declaration
Profiles: creating and processing drinks
52
You can save frequently made drinks in
a profile with your own individual
settings (see “Profiles”).
You can also change the names of your
drinks and delete any unwanted drinks
from your profile. You can save a
maximum of 10 drinks in a profile.
Start in the Drinks menu. First open the
profile you want:
Touch Profiles.
Select the profile you want.
The name of the current profile is
shown in the top left of the display.
Creating a drink
You can create new drinks based on
existing drinks.
Touch Create drink.
Now select a drink.
Change the portion size or drink
parameters for this drink.
Preparation will be begin and you can
save the portions of each component
as desired.
Enter a name for the new drink
(maximum 8 characters) and touch
Save.
The newly created drink will appear in
the profile.
Changing a drink: changing the
portion size(s), drinks
parameters and names
The desired profile with the newly
created drinks will appear in the display.
Select Process drink.
Touch Change drink.
Select a drink.
You can now either change the portion
size(s), drinks parameters or the names
as described.
Delete drink
The desired profile with drinks will
appear in the display.
Select Process drink.
Touch Delete drink.
Select the drink and touch OK.
The entry will be deleted.