User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Guide to the machine
- Unpacking and installing
- Operation
- Before using for the first time
- Bean system
- Filling the water container
- Switching on and off
- Spout adjustment
- Cup heating
- Making coffee with and without milk
- Making coffee with milk
- Tea
- Dispensing hot water
- Parameters
- Portion size
- Resetting drinks
- Profiles
- Profiles: creating and processing drinks
- Profiles: making drinks
- Expert mode
- Settings
- Networking
- Cleaning and care
- Overview of cleaning intervals
- Cleaning by hand or in the dishwasher
- Unsuitable cleaning agents
- Clean the drip tray and waste container
- Cleaning the drip tray cover
- Cleaning the water container
- Removing and cleaning the water container filter
- Cleaning the central spout with integrated Cappuccinatore
- Removing and cleaning the cup sensor
- Cleaning the milk siphon
- Cleaning the milk flask
- Cleaning the milk pipework manually or using the maintenance programme
- Cleaning the bean system
- Ground coffee drawer cleaning
- Vacuuming out the ground coffee chute
- Cleaning the casing
- Maintenance programmes
- Rinsing the machine
- Rinsing the milk pipework
- Cleaning the milk pipework
- Degreasing the brew unit and cleaning the interior
- Descaling the machine
- Automatic descaling
- Problem solving guide
- Service
- Transporting the machine
- Accessories
- Saving energy
- Electrical connection
- Dimensions
- Technical data
- EU Conformity declaration
- UK Conformity declaration
Parameters
46
You can individually adjust the following
parameters for each drink:
- Ground quantity
- Brewing temperature
- Pre-brewing
- Type of beans
Changing drink parameters
Start in the Drinks menu.
Select Process.
Touch Change drink.
Select a drink.
Now you can adjust the portion size
(see “Portion size”) or set the drink
parameters.
Touch Drink parameters.
Select Amount of coffee, Brew
temperature, Pre-brewing or Type of
beans.
Select the setting you want and
touchOK.
The overview of drink parameters will
appear in the display.
Touch OK again to save your
changed settings.
Quantity of coffee
The coffee machine can grind and brew
7.5–12.5g of coffee beans per cup. The
greater the quantity, the stronger the
coffee.
The quantity of coffee is too low if the
espresso or coffee lacks body.
Increase the quantity of coffee so that
more ground coffee is brewed.
The quantity of coffee is too high if the
espresso or coffee tastes bitter.
Decrease the quantity of coffee so that
less ground coffee is brewed.
Brewing temperature
The brewing temperature must be
adapted to the beans you are using and
how they are roasted. It also varies
depending on whether you are making
espresso or coffee.
Some bean types are sensitive to high
brewing temperatures, resulting in an
impaired taste. If your coffee tastes
bitter, the brewing temperature you
have selected might be too high.
Espresso is usually brewed at higher
temperatures.
Pre-brewing the ground coffee
When the pre-brewing function is
turned on, the ground coffee is first
moistened with a little hot water. The
ground coffee swells a little. The
remaining amount of water is then
pressed through the moistened coffee
grounds shortly after. If your coffee
tastes too bland and you want to add
some spice and richness, try the “Pre-
brewing” function. Depending on the
type of coffee used, pre-brewing can
intensify the taste.
You can set a short or long duration for
pre-brewing or turn the “Pre-brewing”
function off completely.
Tip: We particularly recommend using
the “Pre-brewing” function to make
coffee.