User manual

Tea
43
- Off: the TeaTimer is not displayed.
 Select the setting you want and
confirm with OK.
Making tea
The hot water spout is located to the
right of the central spout.
Use the arrow sensor to display and
select the types of tea. Different types
of tea can be found in the drinks menu
afterMilk froth.
Start in the Drinks menu.
 Pour loose tea into a tea filter or
similar or take a tea bag from the
packet.
 Place the tea filter or the tea bag in
the tea cup.
 Place the cup under the hot water
spout.
 Select the type of tea from the
display.
Hot water will be dispensed into the
cup.
You can now start the minute minder for
brewing time if the TeaTimer is switched
on.
Starting the TeaTimer
TeaTimer appears in the bottom left of
the display.
TeaTimer
 Touch TeaTimer.
TeaTimer will be selected. After
dispensing, the editor will open with a
suggested time.
 Adjust the brewing time if necessary
and touch OK.
An audible tone will sound after the
brewing time has elapsed.
 Now remove the tea leaves or the tea
bag.
Cancelling tea preparation
 TouchStop or Cancel.
Tea pot: making several cups
of tea, one after the other
You can make several cups of tea one
after the other automatically with the
Tea pot function (max. 1litre), e.g. to fill
a tea pot. Up to eight cups can be
made in this way.
Start in the Drinks menu.
 Place the tea or tea bag in the tea
pot.
 Place a suitably sized tea pot under
the hot water spout.
 Select Tea pot.
 Select the type of tea you want.
 Select the number of cups you want
(3 to 8).
 Follow the instructions in the display.