User manual

Making coffee with milk
41
The milk flask
Milk is not cooled in the milk flask.
For high-quality milk froth, always
use cold milk (<10°C).
a
Connecting piece
b
Lid
c
Sealing ring
d
Stainless steel tube
e
Glass
Using the milk flask
 Insert the connecting piece into the
lid from above until everything sits
flush.
 Connect the stainless steel tube to
the inside of the lid. Make sure that
the slanted end of the stainless steel
tube is pointing downwards.
 Fill the milk flask with milk up to a
maximum of2cm below the rim. Seal
the milk flask with the lid.
 Place the milk flask next to the coffee
machine.
 Insert the milk pipe into the lid of the
milk flask and connect the flask to the
coffee machine by attaching the pipe
to the aperture in the central spout.
Making drinks with milk
The milk pipework must be connected
to the central spout and submerged in
sufficient cold milk.
Start in the Drinks menu.
 Place a suitable container underneath
the central spout.
 Select a drink.
Dispensing will start.
Cancelling a drink
You can finish dispensing individual
drink components early, e.g. if the cup
is not big enough.
Cancelling individual drink
components
 Touch Stop.
Cancelling the entire drink
preparation
 Touch Cancel.