User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Guide to the machine
- Unpacking and installing
- Operation
- Before using for the first time
- Bean system
- Filling the water container
- Switching on and off
- Spout adjustment
- Cup heating
- Making coffee with and without milk
- Making coffee with milk
- Tea
- Dispensing hot water
- Parameters
- Portion size
- Resetting drinks
- Profiles
- Profiles: creating and processing drinks
- Profiles: making drinks
- Expert mode
- Settings
- Networking
- Cleaning and care
- Overview of cleaning intervals
- Cleaning by hand or in the dishwasher
- Unsuitable cleaning agents
- Clean the drip tray and waste container
- Cleaning the drip tray cover
- Cleaning the water container
- Removing and cleaning the water container filter
- Cleaning the central spout with integrated Cappuccinatore
- Removing and cleaning the cup sensor
- Cleaning the milk siphon
- Cleaning the milk flask
- Cleaning the milk pipework manually or using the maintenance programme
- Cleaning the bean system
- Ground coffee drawer cleaning
- Vacuuming out the ground coffee chute
- Cleaning the casing
- Maintenance programmes
- Rinsing the machine
- Rinsing the milk pipework
- Cleaning the milk pipework
- Degreasing the brew unit and cleaning the interior
- Descaling the machine
- Automatic descaling
- Problem solving guide
- Service
- Transporting the machine
- Accessories
- Saving energy
- Electrical connection
- Dimensions
- Technical data
- EU Conformity declaration
- UK Conformity declaration
Spout adjustment
34
The central spout cannot be manually
adjusted.
Before making the drink, the central
spout moves down and the cup sensor
stops it at the optimum height for the
cups or glasses being used.
You can switch off spout adjustment.
The central spout will then remain in the
upper position while drinks are being
made. When a maintenance programme
is being carried out, the central spout
will move to the height of the cleaning
containers or into a maintenance
position.
Tip: To move the central spout into the
maintenance position, touch for
three seconds.
If the coffee machine is switched off,
the central spout components can be
removed and cleaned at any time. The
central spout will be in the middle
position when switched off.
Switching the spout
adjustment on and off
Start in the Drinks menu.
Touch .
Touch Settings .
Select Spout adjustment.
Select the required option to switch
spout adjustment on or off.
Touch OK.
The setting is now saved.