User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Guide to the machine
- Unpacking and installing
- Operation
- Before using for the first time
- Bean system
- Filling the water container
- Switching on and off
- Spout adjustment
- Cup heating
- Making coffee with and without milk
- Making coffee with milk
- Tea
- Dispensing hot water
- Parameters
- Portion size
- Resetting drinks
- Profiles
- Profiles: creating and processing drinks
- Profiles: making drinks
- Expert mode
- Settings
- Networking
- Cleaning and care
- Overview of cleaning intervals
- Cleaning by hand or in the dishwasher
- Unsuitable cleaning agents
- Clean the drip tray and waste container
- Cleaning the drip tray cover
- Cleaning the water container
- Removing and cleaning the water container filter
- Cleaning the central spout with integrated Cappuccinatore
- Removing and cleaning the cup sensor
- Cleaning the milk siphon
- Cleaning the milk flask
- Cleaning the milk pipework manually or using the maintenance programme
- Cleaning the bean system
- Ground coffee drawer cleaning
- Vacuuming out the ground coffee chute
- Cleaning the casing
- Maintenance programmes
- Rinsing the machine
- Rinsing the milk pipework
- Cleaning the milk pipework
- Degreasing the brew unit and cleaning the interior
- Descaling the machine
- Automatic descaling
- Problem solving guide
- Service
- Transporting the machine
- Accessories
- Saving energy
- Electrical connection
- Dimensions
- Technical data
- EU Conformity declaration
- UK Conformity declaration
Transporting the machine
101
When the display goes out, the
machine has finished evaporating.
Clean the drip tray and waste
container.
Vacuuming out the ground
coffee chute using the
attachment and cleaning the
interior
To ensure coffee residues are removed
thoroughly, you should vacuum out the
ground coffee chute before transporting
and clean out the interior of the
machine carefully.
Insert the attachment supplied and
use the suction tube of your vacuum
cleaner to vacuum out the ground
coffee chute.
Remove the brew unit and clean the
interior of the machine.
Tip: You can also use your vacuum
cleaner to remove any dry ground
coffee residues.
Clean the brew unit before refitting it.
Packing the machine
The coffee machine should only be
packed when it is clean and dry.
Residues of coffee grounds can cause
scratches on surfaces. Coffee and milk
residues or water can cause a build-up
of bacteria.
Use the original packaging including
polystyrene blocks to pack the coffee
machine.
Also pack the operating instructions so
that they are available when the coffee
machine is next used.