Operating instructions Coffee machine To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. en-GB M.-Nr.
Caring for the environment Disposing of the packaging material Disposing of your old appliance The packaging material is used for handling and protects the appliance from transport damage. The packaging material used is selected from materials which are environmentally friendly for disposal and can generally be recycled. Electrical and electronic appliances contain many valuable materials.
Contents Caring for the environment .............................................................................. 2 Warning and Safety instructions...................................................................... 7 Guide to the machine ....................................................................................... 17 Rear of machine .................................................................................................. 18 Milk flask and milk siphon ..............................
Contents Cancelling a drink................................................................................................ 41 Tea....................................................................................................................... TeaTimer.............................................................................................................. Making tea...........................................................................................................
Contents System lock .................................................................................................... Miele@home ........................................................................................................ Display brightness............................................................................................... Volume................................................................................................................. Service...............................
Contents The Miele descaling cartridge ............................................................................. Fitting and removing a descaling cartridge .................................................... Set the start time for automatic descaling (Descaling timer) .............................. Cancelling automatic descaling .......................................................................... Switching off automatic descaling ...................................................................
Warning and Safety instructions This coffee machine complies with all the stipulated safety requirements. Inappropriate use can, however, lead to personal injury and material damage. Read the operating instructions carefully before using the coffee machine. They contain important information on the installation, safety, use and maintenance of the appliance. This prevents both personal injury and damage to the coffee machine.
Warning and Safety instructions Correct application This coffee machine is intended for home use. It must only be used as a domestic appliance to make espresso, cappuccino, latte macchiato, tea etc. Any other use is not permitted. This coffee machine is not intended for outdoor use. This coffee machine must not be used at altitudes above 2000 m.
Warning and Safety instructions Safety with children Danger of burning and scalding on the dispensing spouts. Children's skin is far more sensitive to high temperatures than that of adults. Ensure children do not touch hot surfaces of the coffee machine or place parts of their body under the dispensing spouts. Install the coffee machine where it is out of the reach of children. Children under 8 years of age must be kept away from the coffee machine and the mains connection cable and plug/socket.
Warning and Safety instructions To avoid the risk of damage to the machine, make sure the connection data (voltage and frequency) on the data plate corresponds to the household supply, before connecting the machine to the mains supply. Consult a qualified electrician if in any doubt. The electrical safety of this coffee machine can only be guaranteed when correctly earthed. It is essential that this standard safety requirement is met.
Warning and Safety instructions The mains connection cable should not hang down. Someone could trip over it with the risk of injury and damage the machine. Only use the coffee machine in rooms where the ambient temperature is between +16 °C and +38 °C. Do not place the coffee machine near a window in direct sunshine or right next to an appliance that gives off heat. These would subject the machine to ambient temperatures outside its permitted operating range.
Warning and Safety instructions Never open the outer casing of the machine. Tampering with electrical connections or components and mechanical parts is highly dangerous to the user and can cause operational faults or electric shock.
Warning and Safety instructions Correct use Danger of burning and scalding on the dispensing spouts. The liquids and steam dispensed are very hot. Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed. Do not touch hot components. Hot liquid or steam could spatter from the spouts. Ensure that the central spout is clean and fitted correctly. Water in the drip tray can also be very hot. Take care when emptying it. Danger of injury to the eyes.
Warning and Safety instructions Do not use coffee beans which have been treated with caramel, sugar or other substances including sugary liquids. Sugar will damage the coffee machine. Only fill the coffee chute with ground coffee beans. Do not use any caramelised ready ground coffee. The sugar in the coffee will stick to and block the brew unit of the coffee machine. The cleaning tablets for degreasing the brew unit will not remove this type of deposit.
Warning and Safety instructions Accessories and spare parts Miele can only guarantee the safety of the machine when original Miele spare parts are used. Faulty components must only be replaced by genuine Miele original spare parts. Only use original Miele accessories. If other parts are used, warranty, performance and/or product liability claims will be invalidated.
Warning and Safety instructions For machines with stainless steel surfaces: Do not use sticky notes, adhesive tape, masking tape or other types of adhesive on the stainless steel surfaces. Stainless steel surfaces are susceptible to scratching. Even magnets can cause scratches.
Guide to the machine a On/Off button b “Back” sensor c Touch display d Cup heating e Water container f Bean system with 3 bean containers g Park position for milk tube h Grinder setting i Ground coffee drawer with integrated coffee scoop j Brew unit k Height-adjustable central spout with lighting l Drip tray with lid and waste container m Lower panel with drip tray cover 17
Guide to the machine Rear of machine a Cover b Descaling cartridge holder c Adapter d Miele descaling cartridge 18
Guide to the machine Milk flask and milk siphon a Milk flask b Milk siphon c Milk pipe Central spout in detail a Dispensing spouts for coffee and milk b Cup sensor c Hot-water spout d Stainless steel cover 19
*INSTALLATION* Unpacking and installing Unpacking the coffee machine Unpack the coffee machine. - Vacuum cleaner attachment for cleaning coffee chute Remove any protective foil and notes from the machine. Tip: Please retain the original box and polystyrene pieces so that you can pack the machine securely, should you need to transport it in the future. The drip tray cover can be found in the accessories pack.
*INSTALLATION* Unpacking and installing - The coffee machine must be set up on a level surface. The surface must be water resistant. - The appliance door must be opened completely to remove the brew unit. Place the coffee machine in the location you want to use it. Clean the appliance thoroughly before filling it with mains tap water and coffee beans. Insert the plug of the coffee machine into the socket (see “Electrical connection”).
Operation Touch display Operation The delicate touch display can be scratched by pointed or sharp objects, e.g. pens. Only touch the display with your fingers. If your fingers are cold, the touch display may not react. Drinks You can only select options which are highlighted in light grey. Each time you touch a possible option the relevant field lights up partially or completely orange. Selecting or opening a menu Touch the field you want with your finger.
Operation Entering numbers Use the numerical keypad to enter numbers, e.g. if you want to set a timer duration. The numerical keypad will appear automatically in the relevant menus. Space Save Select the letters or characters you want. Touch Save. Touch the numbers you want. Once you have entered an accepted value, the OK field will light up green. Touch OK. You can delete one character at a time using the arrow sensor.
Operation Symbols in the display The following symbols may also appear in the display in addition to the text: Symbol Explanation 24 This symbol indicates the “Settings” menu and the “Language” menu option. Some settings, e.g. display brightness and buzzer/keypad volume, are selected using a bar chart. This symbol indicates that there is additional information and advice about using the coffee machine. Select OK to confirm the information.
Operation Symbol Explanation This symbol and a fault code will appear if a fault occurs. The strength of the WiFi connection is shown under Settings | Miele@home | Connection status. Symbols represent the connection strength in increments from strong to not connected.
Before using for the first time When you connect the machine to the mains power, the following message will appear in the display: Miele Willkommen. When you switch the coffee machine on for the first time, you will be prompted to set the following: - Language and country - Date - Time - Clock display - Automatic descaling - Water hardness Touch the On/Off sensor . - Off: the display is dark when the machine is switched off. - Night dimming: the time and the date are displayed from 5:00 to 23:00.
Before using for the first time If you want to change the start time, touch Start time and select the required time. You can also change the start time for automatic descaling to a later time. Set the water hardness level Contact your local water supplier to find out your local water hardness range if necessary. The machine has four programmable levels: Pull the cartridge holder forwards and insert the descaling cartridge . Push the cartridge upwards as far as it will go.
Before using for the first time Set up the bean system After setting up the coffee machine, you will be prompted to set up the bean system. The coffee machine will assist you when first filling and naming the bean containers. Touch Yes. If you select No, the assistant for setting up the bean system will not be shown again. Fill the bean container Tip: Open one bean container lid at a time to prevent mixing of bean types when filling the bean system. Take one of the lids off.
Before using for the first time Any remaining drinks which have not been selected will be allocated to the third bean type. You have set up the bean system and you can now prepare drinks. To ensure that any coffee residues from the factory testing process are removed from the brewing system, please throw away the first 2 cups of coffee when using the coffee machine for the first time.
Bean system Coffee or Espresso can be made from whole roasted coffee beans which are freshly ground for each portion. Your coffee machine has a bean system with three bean containers which can be filled with different types of beans or even just one type. You can allocate bean types to individual coffee drinks as you wish. Alternatively, you can create profiles with your own coffee drinks and allocate other bean types to these drinks which are different to the Miele profiles.
Bean system Changing bean system settings (Type of beans) Touch Change name. Start in the Drinks menu. Enter the name you want and then touch Save. Touch . Touch Settings and then Type of beans. Select a bean type. You can now change the name or allocation. Tip: If you want to allocate another type of bean to a coffee drink, you can also do this under Change parameters (see “Parameters - Type of beans”).
Filling the water container Risk to health due to contaminated water. Bacteria can develop in water which has been sitting in the water container for too long and is a risk to your health. Change the water in the water container every day. Risk of damage due to incorrect operation. Unsuitable liquids such as hot or warm water or other liquids can damage the coffee machine. Bottled mineral water leaves too much limescale in the coffee machine. Only use cold, fresh tap water to fill the water container.
Switching on and off Switching the coffee machine on Switching the coffee machine off Touch the On/Off sensor . Touch the On/Off button . The machine heats up and rinses the pipework. Hot water will run out of the central spout. If coffee has been dispensed, the coffee machine will rinse the coffee pipework automatically before switching off. You can now make drinks. Switching off for longer periods of time If the coffee machine is already at operating temperature, rinsing will not take place.
Spout adjustment The central spout cannot be manually adjusted. Before making the drink, the central spout moves down and the cup sensor stops it at the optimum height for the cups or glasses being used. Switching the spout adjustment on and off Start in the Drinks menu. Touch . Touch Settings . Select Spout adjustment. Select the required option to switch spout adjustment on or off. Touch OK. The setting is now saved. You can switch off spout adjustment.
Cup heating Danger of overheating due to Pre-heating cups insufficient ventilation. If the coffee machine is not sufficiently ventilated, the appliance can overheat. Ensure that there is sufficient ventilation around the coffee machine, e.g. do not cover cups on the cup heating surface with a tea towel. Cups should always be pre-heated to allow the flavour of the coffee to develop and its temperature to be retained.
Making coffee with and without milk The following drinks without milk can be made: - Ristretto is a strong, concentrated espresso. It is prepared with the same amount of coffee as for an espresso but with a lot less water. - Espresso is a strong aromatic coffee with a thick hazelnut brown coloured froth – known as the crema – on top. We recommend using espressoroasted coffee beans to make an espresso. - Coffee differs from espresso by the increased amount of water and the roast of the beans.
Making coffee with and without milk The shorter extraction time means that fewer unwanted aromas and bitter compounds will be released. will appear while drinks are being made. DoubleShot can be activated for all drinks apart from “Ristretto” and “Long black”. DoubleShot Making a DoubleShot of coffee Start in the Drinks menu. Place a cup under the central spout. Select the type of coffee you want. Dispensing will start and the following will appear underneath: DoubleShot Touch DoubleShot.
Making coffee with and without milk Making coffee drinks with ground coffee You can make coffee using ready ground coffee. This allows you to make a decaffeinated coffee if the bean container is already filled with regular coffee beans, for example. To do this, fill the ground coffee drawer with ground coffee. The coffee machine will use all the ground coffee which has been added to the chute to make the next coffee. Only one portion of coffee or espresso can be made at a time.
Making coffee with milk The following drinks with milk can be made: - Cappuccino consists of approx. 2 thirds milk froth and 1 third espresso. - Latte macchiato consists of 1 third each of hot milk, milk froth and espresso. - Caffè latte consists of coffee and hot milk. - Cappuccino italiano has the same proportions of milk froth and espresso as a cappuccino. The difference is that the espresso is added first and then the milk froth. - Espresso macchiato.
Making coffee with milk You can prepare milk with the milk siphon or milk flask. There is one connecting piece included in the scope of delivery which can be inserted either into the milk siphon or into the milk flask lid. The appliance is supplied with the connecting piece already inserted into the milk flask lid. The connecting piece is easy to push out from the inside of the milk flask lid.
Making coffee with milk The milk flask Milk is not cooled in the milk flask. For high-quality milk froth, always use cold milk (< 10 °C). Place the milk flask next to the coffee machine. Insert the milk pipe into the lid of the milk flask and connect the flask to the coffee machine by attaching the pipe to the aperture in the central spout.
Tea Danger of burning and scalding on the hot water spout! The liquids and steam dispensed are very hot and can cause scalding. Keep well away from the area underneath the hot water spout when hot liquids and steam are being dispensed. Do not touch hot components. This machine is not intended for commercial or scientific purposes. Temperatures given are approximate and can vary according to ambient conditions. To make tea you can select from the following options: - Green tea approx.
Tea - Off: the TeaTimer is not displayed. Starting the TeaTimer appears in the bottom left of the display. Select the setting you want and confirm with OK. TeaTimer Making tea TeaTimer The hot water spout is located to the right of the central spout. Touch TeaTimer. Use the arrow sensor to display and select the types of tea. Different types of tea can be found in the drinks menu after Milk froth. Start in the Drinks menu.
Tea The teapot will be filled. You can follow the process in the display. You can interrupt preparation at any time: Touch Cancel.
Dispensing hot water Danger of burning and scalding on the hot water spout! The liquids and steam dispensed are very hot and can cause scalding. Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed. Do not touch hot components. The hot water has a temperature of approx. 90 °C when dispensed. The amount of hot water used can be adjusted depending on the size of the cup (see “Portion size”). Start in the Drinks menu.
Parameters You can individually adjust the following parameters for each drink: The quantity of coffee is too high if the espresso or coffee tastes bitter. - Ground quantity Decrease the quantity of coffee so that less ground coffee is brewed. - Brewing temperature - Pre-brewing Brewing temperature - Type of beans The brewing temperature must be adapted to the beans you are using and how they are roasted. It also varies depending on whether you are making espresso or coffee.
Parameters Type of beans You can display which type of bean is saved for the coffee drink or change the allocation. Grinder setting When the beans are ground correctly, the coffee or espresso will flow evenly into the cup with a good crema. The crema should have an even hazelnut brown colour. The grinder setting you select will be used for all coffee drinks. There are various ways to tell whether the coffee grinder is set correctly.
Portion size The flavour of the coffee produced depends not only on the type of coffee, but also on the amount of water used. You can programme the amount of water for all coffee drinks, tea and hot water to suit the size of your cups and to suit the type of coffee you are using. This does not alter the amount of coffee used. For coffee drinks with milk you can also set the amount of milk or milk froth to suit your personal taste. You can also set the portion sizes for hot milk and milk froth.
Resetting drinks You can reset portion sizes and parameters individually or for all drinks back to their factory default setting. Resetting all drinks Touch Reset all drinks. Reset all drinks to default settings? Start in the Drinks menu. will appear in the display. Select Process. Touch Yes to confirm. Resetting a drink Touch Reset drink. Select a drink. Reset drink to default settings? will appear in the display. Touch Yes to confirm.
Profiles In addition to the Miele drinks menu (Miele profile), you can enter up to 10 individual profiles to cater for different tastes and preferences. The portion quantities and parameters for coffee and milk drinks, hot water and tea can be adjusted in each profile. The name of the current profile is shown in the top left of the display. - Delete profile if you want to delete a profile.
Profiles - When switched on: Each time the machine is switched on it will automatically select the Miele drinks menu regardless of which profile was set before the machine was last switched off. Select the required option and touch OK.
Profiles: creating and processing drinks You can save frequently made drinks in a profile with your own individual settings (see “Profiles”). You can also change the names of your drinks and delete any unwanted drinks from your profile. You can save a maximum of 10 drinks in a profile. Touch Change drink. Select a drink. You can now either change the portion size(s), drinks parameters or the names as described. Delete drink Start in the Drinks menu.
Profiles: making drinks Start in the Drinks menu. Touch Profiles. Select the profile you want. The name of the profile selected will be shown in the top left of the display. Now you can make the drink you want. Place a suitable container underneath the central spout. Select a drink. Dispensing will start.
Expert mode In Expert mode you can change the portion size while the drink is being made. The setting will not be saved and will only apply for the current drink. Dispensing Expert mode is not available if you have selected DoubleShot or two portions . Switching Expert mode on and off Start in the Drinks menu. Touch . Select Settings and then Expert mode. To switch Expert mode either on or off, select the option you want. Touch OK.
Settings You can use the “Settings” menu to customise the coffee machine to suit your requirements. Some settings which can be found in the Settings menu are described in their separate sections in the operating instructions. Opening the Settings menu Time You can set the time display, the clock format and the time. Display (Clock display) You can choose one of the following options: - On: - Off: - Night dimming: Start in the Drinks menu. Touch . Select Settings .
Settings - switches on at a particular time, e.g. in the morning for breakfast (Switch on at). remain in memory and will be reactivated after manually switching the machine on again. - switches off at a particular time (Switch off at), Switch off at - switches off after a particular length of time if none of the sensors has been touched or a drink has not been made ( Switch off after; available with Timer 1 only). You can allocate the timer functions to individual days of the week.
Settings Select the timer function you want to use. The selected timer function will have a next to it. Eco mode Eco mode is an energy-saving mode. The system does not heat up until someone starts making a drink. Eco mode is activated by default. Lighting You have the following options: - The machine is switched on: set the brightness. - The machine is switched off: set the brightness and set the time the lighting should switch off.
Settings You can also see how many portions can be dispensed before the brew unit needs to be degreased (No. of drinks until). - Deactivate*/Activate*: - Connection status*: - Set up again*: To return to the previous display, touch . System lock You can lock the coffee machine to prevent it being used without your knowledge, by children, for example. Activating and deactivating the system lock When the system lock is activated, the timer settings for Switch on at are deactivated.
Settings The coffee machine can be demonstrated in the showroom using Demo mode. In this mode the machine lights up but drinks cannot be made or actions taken. Factory default You can reset the coffee machine to its factory default settings. Please refer to the “Overview of available settings” chart for the factory settings. Appliance settings The following will not be reset: - The number of drinks and the appliance status (No. of portions until appliance needs descaling, ...
Networking Your coffee machine is WiFi enabled and can be operated via the Miele@mobile app using a mobile device, e.g. smartphone or tablet. Please ensure you adhere to the warning and safety instructions in these operating instructions even when you are operating the coffee machine via the Miele@mobile app. Energy consumption increases when the coffee machine is connected to a WiFi network. This applies even when the coffee machine is switched off. Select Miele@home and then Set up.
Networking Connection successfully established appears when the coffee machine is connected to a WiFi network. Confirm with OK. Networking the coffee machine via WPS You can change the coffee machine settings, for example, when remote control is switched on in the Miele@mobile app. To start making a drink via the app, MobileStart must be additionally activated. Remote control is activated ex-works. To use the Via WPS connection method, your router must have the WPS function.
Networking MobileStart Switching MobileStart on and off With MobileStart you can start making a drink, for example, via the Miele@mobile app. If you want to use MobileStart, the Remote control option must be switched on. Danger of burning and scalding on the dispensing spouts. If liquids or steam are dispensed while the machine is unsupervised, persons may burn themselves if they place body parts under the central spout or touch hot components.
Networking RemoteUpdate The RemoteUpdate menu option is only displayed and can only be selected if the requirements for using Miele@home have been met. The RemoteUpdate function allows the software on your coffee machine to be updated. If an update is available for your coffee machine, it will automatically download it. Updates will not be installed automatically. They must be initiated manually. If you do not install an update, you can continue to use your coffee machine in the usual way.
Cleaning and care Risk to health due to inadequate cleaning Heat and moisture inside the coffee machine can cause coffee residues to become mouldy and/or milk residues to go off and pose a risk to health. Carefully clean the coffee machine regularly.
Cleaning and care Cleaning by hand or in the dishwasher The brew unit is not dishwasher safe. Clean the brew unit by hand only under warm running water. Do not use washing-up liquid or any other cleaning agent. The following components must be cleaned by hand only: - Central spout stainless steel cover - Cup sensor - Brew unit - Coffee bean container lid - Lower panel Risk of damage as a result of excessively high dishwasher temperatures. Components may be ruined (e.g.
Cleaning and care Danger of burning and scalding on hot components or by hot liquids. Components can become very hot during operation. Touching hot components can cause burning. The liquids and steam dispensed are very hot and can cause scalding. Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed. Always allow the coffee machine to cool down before cleaning it. Please be aware that water in the drip tray can also be very hot.
Cleaning and care Clean the drip tray and waste container Empty the drip tray and the waste container. Danger of burning and scalding on hot components or by hot liquids. Components can become very hot during operation. Touching hot components can cause burning. The liquids and steam dispensed are very hot and can cause scalding. If the pipework has just been rinsed, wait a while before removing the drip tray. Please be aware that water in the drip tray can also be very hot.
Cleaning and care Clean the inside of the machine underneath the drip tray. Replace the waste container, the lid and the lower panel before pushing the drip tray back into the coffee machine. Make sure the drip tray has been pushed right into the machine as far as it will go. Cleaning the drip tray cover Remove the drip tray cover. The drip tray cover can be cleaned in the dishwasher, or by hand using warm water and a little washing-up liquid. Dry the drip tray. Refit the drip tray.
Cleaning and care Cleaning the water container Clean the water container every day. You can clean the water container in the dishwasher once a week. Make sure that the valve, the underside of the water container and the surface the water container sits on are clean. Otherwise, the water container will not sit correctly. Remove the water container. The water container can be cleaned in the dishwasher, or by hand using hot water and a little washing-up liquid. After cleaning, dry the water container.
Cleaning and care Cleaning the central spout with integrated Cappuccinatore With the exception of the stainless steel cover, all parts of the central spout should be cleaned in the dishwasher at least once a week. This will remove coffee deposits and milk residues effectively. Clean the central spout stainless steel cover by hand only using warm water and a little washing-up liquid. Start in the Drinks menu. Remove the dispensing unit to the front.
Cleaning and care Removing and cleaning the cup sensor The cup sensor is located under the central spout. Clean the cup edge sensor daily by hand with warm water and a little washing-up liquid. Clean the surfaces of the central spout with a damp cloth. Clean any blockages in the milk pipework under running water with the special brush supplied: Insert the brush in the pipework. Move it back and forth until all milk residue has been removed.
Cleaning and care Cleaning the milk siphon Clean the milk siphon every day. Rinse the milk siphon under running water. Remove the connecting piece from the stainless steel tube. Clean the individual components in a dishwasher. Tip: Alternatively, you can soak the individual components overnight in water and washing-up liquid. Rinse the components under running water afterwards.
Cleaning and care The milk pipework must be cleaned at least once a week. A message in the display will prompt you when this needs to be done. Confirm the message with OK. When you confirm the message Clean the milk pipework with OK, the internal counter for the cleaning interval will be reset. You will not be reminded again.
Cleaning and care Tip: Open one lid at a time to prevent mixing of bean types when filling the bean system. Ground coffee drawer cleaning Clean the ground coffee drawer and chute for ground coffee regularly, e.g. when you degrease the brew unit. Vacuuming out the ground coffee chute In order to remove coffee residues properly from the grinder channel, you should vacuum out the ground coffee chute once a year with the vacuum cleaner attachment (supplied). Open the appliance door.
Cleaning and care Cleaning the casing If soiling is allowed to stay on for a long time or there is contact with unsuitable cleaning agents, surfaces can alter or discolour. Remove any soiling immediately. Ensure that any splashes of descaler are wiped up immediately. Maintenance programmes The coffee machine has the following maintenance programmes: - Rinsing the machine - Rinsing the milk pipework - Cleaning the milk line - Degreasing the brew unit Switch the coffee machine off.
Cleaning and care Rinsing the machine Rinsing the milk pipework After a coffee has been dispensed, the machine is rinsed before it switches off. This removes any residual coffee. The milk pipework can become blocked by milk residues. The milk pipework should therefore be rinsed regularly. If a drink has been made using milk, the prompt to place the milk pipework into the drip tray will appear at the latest when you switch the machine off. You can also rinse the milk pipework manually.
Cleaning and care Cleaning the milk pipework Carrying out the cleaning process: For optimal cleaning results, we recommend using the Miele cleaning agent for milk pipework. The cleaning agent for milk pipework has been specially developed for use with Miele coffee machines and prevents subsequent damage. It is available to order via the Miele webshop, the Miele Customer Service Department (see the end of this booklet for contact details) or from your Miele dealer.
Cleaning and care Degreasing the brew unit and cleaning the interior Degrease the brew unit when prompted to do so. Depending on the natural oil content of the coffee used, the brew unit can become blocked quite quickly. It must be degreased regularly in order to ensure aromatic coffee and trouble-free operation of the coffee machine. No drinks can be made and Degrease the brew unit appears in the display. We recommend using Miele cleaning tablets to clean the brew unit.
Cleaning and care Dry the funnel to prevent ground coffee sticking to it the next time a coffee is made. Risk to health due to inadequate cleaning Damp coffee residues in the interior of the machine can go mouldy and pose a risk to health. Remove coffee residues regularly and clean the interior of the machine. Press and hold the button under the brew unit handle and, whilst doing so, turn the handle to the left . Carefully pull the brew unit out of the coffee machine.
Cleaning and care Descaling the machine Risk of damage from spilt descaling solution. Sensitive surfaces and/or natural floors can suffer damage. Wipe up any spillages of descaling agent immediately. Drop a cleaning tablet into the top of the brew unit (arrow). Push the brew unit with cleaning tablet back into the coffee machine, making sure it goes in straight. Limescale builds up in the coffee machine through use.
Cleaning and care number of drinks that can be made before descaling will show in the display after each drink. Confirm the message with OK. When the number of remaining portions reaches 0, the coffee machine will lock out. Descale the machine will appear in the display. You can switch the coffee machine off if you do not want to carry out the descaling programme at this point in time. You can not make any drinks until the machine has been descaled.
Cleaning and care Follow the further instructions given in the display. When Rinse the water container and fill it to the symbol with fresh tap water appears in the display: Remove the water container and rinse it thoroughly with clean water. Ensure that no descaling solution residue remains in the water container. Fill the water container to the descaling symbol with fresh tap water. The descaling process is complete at the end of the rinsing process. You can now make drinks again.
Automatic descaling Risk of damage from spilt descaling solution. Sensitive surfaces and/or natural floors can suffer damage. Wipe up any spillages of descaling agent. When handling a cartridge which has already been filled with water, ensure that the descaling solution does not come into contact with sensitive surfaces. The coffee machine has an automatic maintenance programme for descaling the machine. For automatic descaling, a Miele descaling cartridge is fitted at the back of the coffee machine.
Automatic descaling The Miele descaling cartridge Only use the Miele descaling cartridge for the automatic descaling programme. Please note that the Miele descaling cartridge has a lifespan of approx. one year after it has been placed in the machine and filled with water for the first time. Critical for the one-year shelf life is the date on which the descaling cartridge was fitted and filled with water. Do not fit a descaling cartridge which has already been used in another Miele coffee machine.
Automatic descaling Fitting and removing a descaling cartridge Risk of damage from spilt descaling solution. Sensitive surfaces and/or natural floors can suffer damage. When handling a cartridge which has already been filled with water, ensure that the descaling solution does not come into contact with sensitive surfaces. The coffee machine is switched on. Only then will the appliance detect the descaling cartridge. Pull the cartridge holder forwards. There is already a cartridge fitted.
Automatic descaling The cap is located on the cartridge. Release it by snapping it off. Dispose of the spent cartridge with your household waste. Fit the descaling cartridge Insert the cartridge and push it upwards as far as it will go. Push the cartridge holder back and then close the cover. Follow the instructions in the display. The next time the coffee machine is switched off, the descaling cartridge will also fill with water when the machine is rinsed.
Automatic descaling Switching off automatic descaling If you remove the descaling cartridge, automatic descaling is deactivated. You will then descale manually using the Descale the machine maintenance programme. To do this, the appropriate descaling agent is required (see “Cleaning and care - Descaling the machine”). Remove the descaling cartridge and seal the system with the adapter.
Problem solving guide Many malfunctions and faults that can occur in daily operation can be easily remedied. Time and money will be saved because a service call will not be needed. The following guide may help you to find the reason for a malfunction or a fault, and to correct it. Messages in the display Error messages must be confirmed with OK, otherwise the message can reappear in the display even though the problem has been remedied.
Problem solving guide Problem Cause and remedy F73 or The brew unit cannot be positioned correctly. Switch the machine off with the On/Off sensor. Remove the brew unit and clean it by hand. Check the brew unit Push the coffee ejector of the brew unit into the correct position. Do not fit the brew unit. Close the service panel and switch the coffee machine on with the On/ Off sensor. This will initialise the brew unit motor and put it back into the start position.
Problem solving guide Problem Cause and remedy F233 The cup sensor is not inserted or is incorrectly inserted. The stainless steel cover of the central spout was not fitted properly, e.g. is tilting forwards slightly. If the central spout is moving upwards and the cup sensor is bumped, e.g. with a cup, the cup sensor loses its reference position. Confirm the message with OK. Switch the machine off with the On/Off sensor. Wait for at least 30 minutes before switching the machine back on again.
Problem solving guide Unusual performance of the coffee machine Problem Cause and remedy The lighting remains off The lighting has been switched off. after the coffee ma Switch the lighting on (see “Settings - Lighting”). chine has been The lighting is faulty. switched on. Call Service. The display remains dark when the coffee machine is turned on using the On/Off button . The On/Off button was not held for long enough. Touch and hold the On/Off sensor for at least three seconds.
Problem solving guide Problem Cause and remedy The coffee machine does not switch itself on, although the Switch on at setting has been activated for the timer. The system lock has been activated. Deactivate the system lock. A day of the week has not been selected and/or the timer has not been activated. Check and change the timer settings. The coffee machine was not used after being switched on automatically three times in succession (holiday mode). Switch the machine on and dispense a drink.
Problem solving guide Problem Cause and remedy The descaling cartridge is not fitted. The coffee appears after machine needs descaling. switching on even Switch the machine off with the On/Off sensor. though the container is Wait approx. one hour. filled and fitted in the Switch the appliance back on again. As soon as machine. The appliance Heating-up phase appears, touch Mainten. and then does not rinse. select Descale the machine. Descale the coffee machine.
Problem solving guide Problem Cause and remedy The waste container is overflowing even though the drip tray and waste container have been emptied following each reminder. The drip tray has probably been removed without the waste container being emptied. Removing the drip tray resets the internal counter for emptying the waste container. Always empty the waste container if you remove the drip tray.
Problem solving guide Problem Cause and remedy Neither milk nor milk froth comes out of the central spout. The milk pipework is blocked. Clean the central spout and milk pipework carefully with the brush. A fan can be heard even though no drinks are being prepared or the coffee machine is switched off. This is not a fault. Once a drink has been dispensed or the machine has been switched off, the internal fan will continue to run until the interior is sufficiently dehumidified.
Problem solving guide Faults with automatic descaling Problem Cause and remedy After switching on, a message appears informing you that automatic descaling could not be carried out. If you have made drinks with milk, the milk tube must be pushed into the drip tray and when the machine is switched off, the message about this in the display confirmed with OK. All removable parts, such as the water container, drip tray, brew unit or central spout must be fitted.
Problem solving guide Unsatisfactory results Problem Cause and remedy The coffee is not hot enough. The cup has not been pre-heated. The smaller the cup and the thicker its sides, the more important it is to pre-heat it. Pre-heat the cups, e.g. using the cup heating (depending on model). The brewing temperature has been set too low. Set a higher brewing temperature. The filters in the brew unit are blocked. Remove the brew unit and clean it by hand. Degrease the brew unit.
Problem solving guide Problem Cause and remedy There is no crema on the coffee or espresso. The coffee beans are no longer fresh. If roasted coffee beans are stored open for too long, the carbon dioxide gradually escapes from the coffee beans. The crema is no longer formed during dispensing. Of course, you can still use the coffee beans. The coffee tastes weak. The coffee grounds in the waste container are sludgy and grainy.
Service Contact in the event of a fault Warranty In the event of any faults which you cannot remedy yourself, please contact your Miele dealer or the Miele Customer Service Department. For information on the appliance warranty specific to your country please contact Miele. See back cover for address. You can book a Miele Customer Service Department call-out online at www.miele.com/service. Contact information for the Miele Customer Service Department can be found at the end of this document.
Transporting the machine If you are not going to use the coffee machine for an extended period of time, e.g. whilst on holiday, or if it needs to be moved, a number of procedures will need be carried out to ensure its safety. Select Settings and then Service. Select Evaporate and then Yes. Follow the instructions in the display. - Empty and clean the coffee bean container - Empty and clean the water container - Evaporate the coffee machine - Remove the descaling cartridge and insert the adapter.
Transporting the machine When the display goes out, the machine has finished evaporating. Clean the drip tray and waste container. Vacuuming out the ground coffee chute using the attachment and cleaning the interior To ensure coffee residues are removed thoroughly, you should vacuum out the ground coffee chute before transporting and clean out the interior of the machine carefully. Packing the machine The coffee machine should only be packed when it is clean and dry.
Accessories These products and other useful accessories can be ordered via the Miele webshop, from Miele (see back cover for contact details) or from your Miele dealer. - Microfibre cloth for removing finger marks and light soiling - Cleaning agent for milk pipework for cleaning the milk system - Cleaning tablets for degreasing the brew unit - Descaling cartridge for automatic descaling - Descaling tablets for manual descaling - CJ Jug 1.
Saving energy The following tips can help you save energy and money as well as care for the environment: - Operate the coffee machine in “Eco mode” (default setting). - Select dimmer lighting or abstain from using lighting when the appliance is switched on. - Switch off the lighting switch-off time when the appliance is switched off. - Switch off the clock display. - Energy consumption may increase if you change the settings for the “timers”. This setting uses more energy appears in the display.
Electrical connection Before connecting the coffee machine, make sure that the connection data on the data plate (voltage and frequency) matches that of the electricity supply. This data must match in order to avoid the risk of damage to the coffee machine. If in any doubt, consult a qualified electrician. The required connection data is provided on the data plate. The data plate can be seen on the left-hand side of the machine when the drip tray is pulled out.
*INSTALLATION* Dimensions a = 311 mm b = 420 mm c = 445 mm 105
Technical data Electricity consumption in standby: < 0.4 W Electricity consumption in networked standby: < 0.9 W Pump pressure: Max. 15 bar Through-flow heater: 1 stainless steel thermo block Dimensions (W x H x D): 311 x 420 x 445 mm Net weight: 14.2 kg Connection cable length: 120 cm Water container capacity: 2.2 l Total capacity of bean containers: Coffee bean container A: Approx. 540 g Coffee bean container B: Approx. 150 g Coffee bean container C: Approx. 210 g Approx.
EU Conformity declaration Miele hereby declares that this coffee machine complies with Directive 2014/53/EU. The complete text of the EU declaration of conformity is available from one of the following internet addresses: - Products, Download from www.miele.ie - For service, information, operating instructions etc: go to www.miele.ie/ domestic/customerinformation-385.
UK Conformity declaration Miele hereby declares that this coffee machine complies with UK Radio Equipment Regulations 2017, as amended. The complete text of the UK declaration of conformity is available from one of the following internet addresses: - Products, Download from www.miele.co.uk - For service, information, operating instructions etc: go to www.miele.co.
United Kingdom Miele Co. Ltd., Fairacres, Marcham Road, Abingdon, Oxon, OX14 1TW Tel: 0330 160 6600, Internet: www.miele.co.uk/service, E-mail: info@miele.co.uk Australia Miele Australia Pty. Ltd. ACN 005 635 398 ABN 96 005 635 398 Level 4, 141 Camberwell Road Hawthorn East, VIC 3123 Tel: 1300 464 353 Internet: www.miele.com.au China Mainland Miele Electrical Appliances Co., Ltd. 1-3 Floor, No.
CM 7750 CoffeeSelect en-GB M.-Nr.
