User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Product description
- Controls and indicators
- Operation
- Miele@home
- Before using for the first time
- Filling the water container
- Filling the coffee bean container
- Switching on and off
- Cup heating
- Adjusting the central spout to the correct cup height
- Making drinks
- Expert mode
- Grinder setting
- Parameters
- Profiles
- MobileStart
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Cleaning by hand or in the dishwasher
- Unsuitable cleaning agents
- Drip tray and waste container
- Cleaning the drip tray cover
- Water container
- Removing and cleaning the water container filter
- Dismantling and cleaning the central spout
- Cleaning the steam jet
- Cleaning the milk pipework and rinse valve
- Cleaning the milk siphon
- Cleaning the milk flask
- Bean container and ground coffee chute
- Cleaning the casing
- Opening the “Maintenance” menu
- _
- Rinsing the milk pipework
- Cleaning the milk pipework (maintenance programme)
- Degreasing the brew unit and cleaning the interior
- Descaling the machine
- Problem solving guide
- Transporting the machine
- After sales service and warranty
- Accessories
- Saving energy
- Electrical connection
- Installation
- Appliance dimensions
- Technical data
- EU Conformity declaration
- UK Conformity declaration
Making drinks
33
Attach the rinse valve to the
connecting piece.
Open the milk carton and dip the milk
siphon into the milk. Place the milk
carton to the right next to the coffee
machine.
Connect the milk pipework to the
aperture in the central spout.
Tip: Rinse the milk siphon under
running water after use.
The milk flask
depending on model: CM6360,
CM6560
Milk is not cooled in the milk flask.
For high-quality milk froth, always
use cold milk (<10°C).
a
Connecting piece
b
Lid
c
Sealing ring
d
Stainless steel tube
e
Glass
Using the milk flask
Insert the connecting piece into the
lid from above until everything sits
flush.
Connect the stainless steel tube to
the inside of the lid. Make sure that
the slanted end of the stainless steel
tube is pointing downwards.
Fill the milk flask with milk up to a
maximum of2cm below the rim. Seal
the milk flask with the lid.