User manual

Electrical connection
85
Before connecting the coffee machine,
make sure that the connection data on
the data plate (voltage and frequency)
matches that of the electricity supply.
This data must match in order to avoid
the risk of damage to the coffee
machine. If in any doubt, consult a
qualified electrician.
The required connection data is
provided on the data plate. The data
plate can be seen on the left-hand side
of the machine when the drip tray is
pulled out.
The appliance is supplied with a mains
cable ready for connection to an AC
220–240V 50Hz supply.
The coffee machine must be connected
to the mains supply via a suitable
earthed socket. Connection must
comply with national and local safety
regulations (BS 7671 in the UK).
The fuse rating must be at least 10A.
The socket should be next to the
appliance and easily accessible where
possible.
Do not connect the coffee machine to
the mains electricity supply using a
multi-socket adapter or an extension
lead. These do not guarantee the
required safety of the machine (fire risk).
Do not connect the coffee machine to a
stand-alone inverter. Stand-alone
inverters are used for autonomous
power supply, e.g. a solar power
system. Power surges could trigger the
Auto switch off function. This could
damage the electronic module.
The coffee machine must not be used
with “energy saving plugs”. These
reduce the amount of energy supplied
to the appliance, causing it to overheat.
If the mains connection cable is faulty,
it must only be replaced by a qualified
electrician in order to avoid a hazard.