User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Product description
- Controls and indicators
- Operation
- Miele@home
- Before using for the first time
- Filling the water container
- Filling the coffee bean container
- Switching on and off
- Cup heating
- Adjusting the central spout to the correct cup height
- Making drinks
- Expert mode
- Grinder setting
- Parameters
- Profiles
- MobileStart
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Cleaning by hand or in the dishwasher
- Unsuitable cleaning agents
- Drip tray and waste container
- Cleaning the drip tray cover
- Water container
- Removing and cleaning the water container filter
- Dismantling and cleaning the central spout
- Cleaning the steam jet
- Cleaning the milk pipework and rinse valve
- Cleaning the milk siphon
- Cleaning the milk flask
- Bean container and ground coffee chute
- Cleaning the casing
- Opening the “Maintenance” menu
- _
- Rinsing the milk pipework
- Cleaning the milk pipework (maintenance programme)
- Degreasing the brew unit and cleaning the interior
- Descaling the machine
- Problem solving guide
- Transporting the machine
- After sales service and warranty
- Accessories
- Saving energy
- Electrical connection
- Installation
- Appliance dimensions
- Technical data
- EU Conformity declaration
- UK Conformity declaration
Cleaning and care
59
Refit the dispensing unit onto the
central spout.
Replace the stainless steel cover and
connect the milk pipework if required.
Tip: The “seam” on the milk pipework
and on the central spout makes it easier
to assemble.
Cleaning the steam jet
Clean the steam jet once a month.
Push the central spout right down
and remove the stainless steel cover
by pulling it off towards you.
Remove the dispensing unit to the
front.
Push the cleaning brush a max.
of1cm into the steam jet.
Clean the steam jet with the cleaning
brush.
Push the dispensing unit back into
the central spout and replace the
stainless steel cover.
Cleaning the milk pipework
and rinse valve
Risk of damage due to incorrect
cleaning.
The silicone plug can be damaged
by pointed objects, e.g. also the
cleaning brush, and stop working.
Do not use pointed objects, e.g. a
needle, for cleaning.
Only clean the silicone plug under
running water and/or in the
dishwasher. Do not use the cleaning
brush supplied with the appliance.
Clean the rinse valve and milk pipework
once a week.