User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Product description
- Controls and indicators
- Operation
- Miele@home
- Before using for the first time
- Filling the water container
- Filling the coffee bean container
- Switching on and off
- Cup heating
- Adjusting the central spout to the correct cup height
- Making drinks
- Expert mode
- Grinder setting
- Parameters
- Profiles
- MobileStart
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Cleaning by hand or in the dishwasher
- Unsuitable cleaning agents
- Drip tray and waste container
- Cleaning the drip tray cover
- Water container
- Removing and cleaning the water container filter
- Dismantling and cleaning the central spout
- Cleaning the steam jet
- Cleaning the milk pipework and rinse valve
- Cleaning the milk siphon
- Cleaning the milk flask
- Bean container and ground coffee chute
- Cleaning the casing
- Opening the “Maintenance” menu
- _
- Rinsing the milk pipework
- Cleaning the milk pipework (maintenance programme)
- Degreasing the brew unit and cleaning the interior
- Descaling the machine
- Problem solving guide
- Transporting the machine
- After sales service and warranty
- Accessories
- Saving energy
- Electrical connection
- Installation
- Appliance dimensions
- Technical data
- EU Conformity declaration
- UK Conformity declaration
Cleaning and care
57
Removing and cleaning the
water container filter
Clean the water container filter once a
month.
The water container filter is located
under the water container.
Remove the water container.
Unscrew the cap. Remove the sealing
ring and the filter.
Rinse all parts carefully under running
water.
Then replace the water container filter
(with the cross facing upwards) and
then the sealing ring. Finally screw
the cap back on tightly.
Replace the water container.
Dismantling and cleaning the
central spout
Clean the central spout’s stainless
steel cover by hand only, using
warm water and a little washing-up
liquid.
All other parts are dishwasher-safe.
- Use the supplied cleaning brush for
parts that are difficult to reach, e.g. in
the dispensing unit.
- Stubborn soiling is easier to clean if
you soak the individual components
overnight in water and washing-up
liquid. Rinse the components under
running water afterwards.
Push the central spout right down
and remove the stainless steel cover
by pulling it off towards you.
Remove the dispensing unit to the
front.