User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Product description
- Controls and indicators
- Operation
- Miele@home
- Before using for the first time
- Filling the water container
- Filling the coffee bean container
- Switching on and off
- Cup heating
- Adjusting the central spout to the correct cup height
- Making drinks
- Expert mode
- Grinder setting
- Parameters
- Profiles
- MobileStart
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Cleaning by hand or in the dishwasher
- Unsuitable cleaning agents
- Drip tray and waste container
- Cleaning the drip tray cover
- Water container
- Removing and cleaning the water container filter
- Dismantling and cleaning the central spout
- Cleaning the steam jet
- Cleaning the milk pipework and rinse valve
- Cleaning the milk siphon
- Cleaning the milk flask
- Bean container and ground coffee chute
- Cleaning the casing
- Opening the “Maintenance” menu
- _
- Rinsing the milk pipework
- Cleaning the milk pipework (maintenance programme)
- Degreasing the brew unit and cleaning the interior
- Descaling the machine
- Problem solving guide
- Transporting the machine
- After sales service and warranty
- Accessories
- Saving energy
- Electrical connection
- Installation
- Appliance dimensions
- Technical data
- EU Conformity declaration
- UK Conformity declaration
Cleaning and care
56
Cleaning the drip tray cover
Remove the drip tray cover.
The drip tray cover can be cleaned in
the dishwasher, or by hand using
warm water and a little washing-up
liquid.
Dry the drip tray.
Refit the drip tray. Make sure that the
drip tray cover is correctly fitted (see
picture).
Water container
Clean the water container lid by
hand only using warm water and a
little washing-up liquid.
Clean the water container every day.
You can clean the water container in the
dishwasher once a week.
Press on the mark on the water
container lid.
Pull the water container up by the lid
to remove it.
Remove the lid from the container
and wash it by hand.
The water container can be cleaned
in the dishwasher, or by hand using
hot water and a little washing-up
liquid. After cleaning, dry the water
container.
Carefully clean and dry the surface
the water container sits on, taking
special care to clean the recesses
properly.
Reassemble the water container.
Make sure that the valve, the
underside of the water container and
the surface the water container sits on
are clean. Otherwise the water
container will not sit correctly.