User manual

Before using for the first time
25
Setting the water hardness level
Contact your local water supplier to
find out your local water hardness
range if necessary.
More information can be found under
“Settings – Water hardness”.
 Enter your local water hardness (in
°dH) and confirm withOK.
Selecting the Performance mode
You can select the appropriate mode to
suit your personal preferences (see
“Settings – Performance mode”).
- Eco mode: This is an energy-saving
mode.
- Barista mode: This mode has been
optimised for unadulterated coffee
enjoyment.
- Latte mode: In this mode, milk-
based drinks can be prepared within
a much shorter space of time.
 Select the desired mode and confirm
withOK.
Your machine has been successfully set
up and is ready for use.
 Confirm withOK.
The coffee machine heats up and rinses
the pipework. The water used for
rinsing will run out of the central spout.
 Before preparing milk for the first
time, rinse the milk pipework (see
“Cleaning and care – Rinsing the milk
pipework”).
Please note that the full aroma of the
coffee and typical crema will not
develop fully until several coffees have
been made.
To ensure that any coffee residues
from the factory testing process are
removed from the brewing system,
please throw away the first 2cups of
coffee when using the coffee
machine for the first time.
Switch the coffee machine off with
the On/Offbutton. Do not unplug
the power plug to switch off the
coffee machine. If you unplug the
coffee machine from the mains
supply while using it for the first time,
you will have to set it up for use
again.
For the first coffee drinks, a larger
quantity of coffee beans is ground and
powder from the coffee grounds may
adhere to the lid of the drip tray.