User manual

Installation
*INSTALLATION*
71
 Danger of overheating due to
insufficient ventilation.
If the coffee machine is not
sufficiently ventilated, the appliance
can overheat.
Please ensure that there is adequate
ventilation around the coffee
machine.
Do not cover the coffee machine
with tea towels etc. while it is in use.
If the coffee machine is installed
behind a closed furniture front, heat
and moisture can build up behind the
furniture front when closed. This can
result in damage to the coffee
machine and/or furniture unit.
Do not close the furniture front while
the coffee machine is in use.
Please observe the following installation
instructions:
- The location of the machine must be
dry and well ventilated.
- The ambient temperature of the room
in which the machine is used must be
between 10°C and 38°C.
- The machine must be set up on a
level surface. The surface must be
water resistant.
If the machine is installed in a niche, the
niche must provide the following
minimum dimensions:
Height 510mm
Width 450mm
Depth 575mm
When setting up the machine: make
sure that the service panel can be
fully opened so that the brew unit
can be removed with ease when
required.
 The machine must be set up in the
niche such that it sits flush with the
front edge of the niche.