User manual

Cleaning and care
50
 When prompted, place the milk
pipework into the right-hand opening
in the drip tray.
 Confirm withOK.
The milk pipework will now be rinsed.
Cleaning the milk pipework
using the maintenance
programme
For optimal cleaning results, we
recommend using the Miele cleaning
agent for milk pipework. The cleaning
agent for milk pipework has been
specially developed for use with Miele
coffee machines and prevents
subsequent damage.
It is available to order via the Miele
webshop, the Miele Customer Service
Department (see the end of this booklet
for contact details) or from your Miele
dealer.
To clean the milk pipework you need
1sachet of cleaning agent for milk
pipework.
The Clean milk pipework maintenance
programme lasts for
approx.10minutes.
 Touch the sensor control.
 Select Maintenance| Clean milk
pipework.
The cleaning process cannot be
cancelled. It must be completed
through to the end.
 Confirm withOK.
The process will start.
 Follow the instructions in the display.
Place milk pipe in cleaning agent will
appear in the display.
Preparing the cleaning solution:
 Dissolve the cleaning agent in a
container with 200ml of lukewarm
water. Stir the solution with a spoon
until the powder has fully dissolved.
Carrying out the cleaning process:
 Place the container next to the coffee
machine and hang the milk pipework
tube in the solution. Make sure the
milk pipework is placed sufficiently
far into the cleaning solution.