User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Product description
- Controls and indicators
- Accessories
- Operation
- Before using for the first time
- Water hardness
- Filling the water container
- Filling the coffee bean container
- Switching on and off
- Adjusting the central spout to the correct cup height
- Making drinks
- Grinder setting
- Quantity of coffee, brew temperature and pre-brewing
- Portion size
- Profiles
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Cleaning by hand or in the dishwasher
- Unsuitable cleaning agents
- Waste container, drip tray and drip tray cover
- Cleaning the water container
- Removing and cleaning the water container filter
- Central spout
- Milk pipework
- Bean container and ground coffee chute
- Cleaning the casing
- Opening the menu
- Rinsing the appliance
- Rinsing the milk pipework
- Cleaning the milk pipework using the maintenance programme
- Degreasing the brew unit and cleaning the interior
- Descaling the machine
- Transporting the machine
- Problem solving guide
- After sales service and warranty
- Saving energy
- Electrical connection
- Installation
- Dimensions
- Technical data
Warning and Safety instructions
9
Technical safety
A damaged coffee machine is dangerous. Check it for any visible
damage before setting it up. Never attempt to use a damaged coffee
machine.
To avoid the risk of damage to the machine, make sure the
connection data (voltage and frequency) on the data plate
corresponds to the household supply, before connecting the
machine to the mains supply. Consult a qualified electrician if in any
doubt.
The electrical safety of this coffee machine can only be
guaranteed when correctly earthed. It is essential that this standard
safety requirement is met. If in any doubt please have the electrical
installation tested by a qualified electrician.
Temporary or permanent operation on an autonomous power
supply system or a power supply system that is not synchronised
with the mains power supply (e.g. island networks, back-up systems)
is possible. A prerequisite for operation is that the power supply
system complies with the specifications of EN50160 or an
equivalent standard.
The function and operation of the protective measures provided in
the domestic electrical installation and in this Miele product must
also be maintained in isolated operation or in operation that is not
synchronised with the mains power supply, or these measures must
be replaced by equivalent measures in the installation. As described,
for example, in the current version of BS OHSAS 18001–2 ISO
45001.
Do not connect the machine to the mains electricity supply by a
multi-socket adapter or an extension lead. These are a fire hazard
and do not guarantee the required safety of the appliance.
The coffee machine must not be used in a non-stationary location
(e.g. on a ship).