User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Product description
- Controls and indicators
- Accessories
- Operation
- Before using for the first time
- Water hardness
- Filling the water container
- Filling the coffee bean container
- Switching on and off
- Adjusting the central spout to the correct cup height
- Making drinks
- Grinder setting
- Quantity of coffee, brew temperature and pre-brewing
- Portion size
- Profiles
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Cleaning by hand or in the dishwasher
- Unsuitable cleaning agents
- Waste container, drip tray and drip tray cover
- Cleaning the water container
- Removing and cleaning the water container filter
- Central spout
- Milk pipework
- Bean container and ground coffee chute
- Cleaning the casing
- Opening the menu
- Rinsing the appliance
- Rinsing the milk pipework
- Cleaning the milk pipework using the maintenance programme
- Degreasing the brew unit and cleaning the interior
- Descaling the machine
- Transporting the machine
- Problem solving guide
- After sales service and warranty
- Saving energy
- Electrical connection
- Installation
- Dimensions
- Technical data
Cleaning and care
44
- melamine eraser blocks
- sharp metal scrapers
- steel wool or stainless steel wire
scourers
Waste container, drip tray and
drip tray cover
Clean the drip tray and waste
container every day to avoid
unpleasant smells and mildew.
The waste container is located in the
drip tray. Water from rinsing also
collects in the waste container.
A prompt will appear in the display
when the drip tray and/or the waste
container is full and needs to be
emptied. Empty the drip tray and the
waste container.
Danger of burning.
If the rinsing process has just
finished, wait a while before
removing the drip tray from the
machine. The water used for rinsing
will continue to run out of the coffee
spouts for a while.
Pull the drip tray carefully out of the
machine. Take the lid off.
Empty the drip tray and the waste
container.
Remove drip tray cover and lower
panel.
Clean all parts thoroughly.