User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Product description
- Controls and indicators
- Accessories
- Operation
- Before using for the first time
- Water hardness
- Filling the water container
- Filling the coffee bean container
- Switching on and off
- Adjusting the central spout to the correct cup height
- Making drinks
- Grinder setting
- Quantity of coffee, brew temperature and pre-brewing
- Portion size
- Profiles
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Cleaning by hand or in the dishwasher
- Unsuitable cleaning agents
- Waste container, drip tray and drip tray cover
- Cleaning the water container
- Removing and cleaning the water container filter
- Central spout
- Milk pipework
- Bean container and ground coffee chute
- Cleaning the casing
- Opening the menu
- Rinsing the appliance
- Rinsing the milk pipework
- Cleaning the milk pipework using the maintenance programme
- Degreasing the brew unit and cleaning the interior
- Descaling the machine
- Transporting the machine
- Problem solving guide
- After sales service and warranty
- Saving energy
- Electrical connection
- Installation
- Dimensions
- Technical data
Problem solving guide
60
Unusual performance of the coffee machine
Problem Cause and remedy
The display remains
dark when the coffee
machine is turned on
using the On/Offbut-
ton.
The On/Offbutton was not held for long enough.
Touch and hold the On/Offbutton for at least
3seconds.
The plug is not inserted in the socket correctly.
Insert the plug into the socket.
The fuse has tripped because the coffee machine,
voltage or another appliance is defective.
Switch off at the wall socket and unplug the coffee
machine.
Contact a qualified electrician or the Miele
Customer Service Department.
The coffee machine
turns off suddenly.
The factory set switch-off time (20minutes) or the
switch-off time you have programmed has been
reached.
If required, you can select a new switch-off time
(see “Settings – Timer”).
The plug is not inserted in the socket correctly.
Insert the plug into the socket.
The sensors do not re-
act to touch.
The coffee machine
cannot be operated.
There is an internal fault.
Disconnect the machine from the power supply by
removing the plug from the socket.
The display is hard to
see or not able to be
read.
The display brightness has been set too low.
Change this setting (see “Settings”).