User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Product description
- Controls and indicators
- Accessories
- Operation
- Before using for the first time
- Water hardness
- Filling the water container
- Filling the coffee bean container
- Switching on and off
- Adjusting the central spout to the correct cup height
- Making drinks
- Grinder setting
- Quantity of coffee, brew temperature and pre-brewing
- Portion size
- Profiles
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Cleaning by hand or in the dishwasher
- Unsuitable cleaning agents
- Waste container, drip tray and drip tray cover
- Cleaning the water container
- Removing and cleaning the water container filter
- Central spout
- Milk pipework
- Bean container and ground coffee chute
- Cleaning the casing
- Opening the menu
- Rinsing the appliance
- Rinsing the milk pipework
- Cleaning the milk pipework using the maintenance programme
- Degreasing the brew unit and cleaning the interior
- Descaling the machine
- Transporting the machine
- Problem solving guide
- After sales service and warranty
- Saving energy
- Electrical connection
- Installation
- Dimensions
- Technical data
Switching on and off
26
Switching the coffee machine
on
Touch the On/Offbutton.
The appliance heats up and rinses the
pipework. Hot water will run out of the
central spout.
When Select drink appears in the display,
you can make drinks.
If the coffee machine is already at
operating temperature, rinsing will not
take place.
If you do not touch any buttons or run
any maintenance programmes, the
display will switch itself off after approx.
7minutes to save energy.
The right-hand LED will flash on and off
as long as the coffee machine is
switched on.
Touch one of the sensor controls to
wake the coffee machine up again to
make a drink.
Switching the coffee machine
off
Touch the On/Offbutton.
If coffee has been dispensed, the coffee
machine will rinse the pipework
automatically before switching off.
If you have made a drink using milk,
Place milk pipe in drip tray will appear in
the display.
Insert the end of the milk pipework
into the aperture in the drip tray, then
touch OK.
Switching off for longer
periods of time
If the coffee machine is not going to be
used for a while, e.g. if you are going on
holiday, remember to do the following:
Empty the drip tray, the waste
container and the water container.
Clean all parts thoroughly, including
the brew unit.
If necessary, switch off the coffee
machine and unplug it to disconnect
it from the power supply.