Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Guide to the machine
- Operation
- Miele@home
- Before using for the first time
- Bean system
- Filling the water container
- Switching on and off
- Spout adjustment
- Making drinks
- Expert mode
- Grinder setting
- Parameters
- Portion size
- Resetting drinks
- Profiles
- Profiles: creating and editing drinks
- MyMiele
- MobileStart
- Settings
- Displaying and changing settings
- Language
- Time
- Date
- Start screen
- Timer
- Volume
- Display
- Lighting
- Info (display information)
- Fresh water
- Altitude
- Performance mode
- Water hardness
- Movement sensor
- System lock
- _
- Remote control
- SuperVision
- RemoteUpdate
- Software version
- Legal information
- Showroom programme (demo mode)
- Factory defaults
- Cleaning and care
- Overview of cleaning intervals
- Cleaning by hand or in the dishwasher
- Unsuitable cleaning agents
- Cleaning the drip tray and waste container
- Cleaning the drip tray cover
- Water container
- Cleaning the central spout
- Cleaning the cup rim sensor
- Cleaning the milk flask with lid
- Cleaning the milk valve (daily)
- Removing and cleaning the milk valve (once a month)
- Cleaning the bean containers
- Removing the brew unit and cleaning it by hand
- Cleaning the interior, inside of the machine door and drip tray
- Cleaning the front of the machine
- Maintenance programmes
- Rinsing the machine
- Rinsing the milk pipework
- Maintenance programme:
- Degreasing the brew unit and cleaning the interior
- Descaling the machine
- Automatic cleaning and descaling
- Problem solving guide
- After sales service and warranty
- Accessories
- Installation
- Technical data
- EU Conformity declaration
- UK Conformity declaration
- Copyrights and Licences
Problem solving guide
95
Problem Cause and remedy
A fan can be heard even
though no drinks are
being prepared or the
coffee machine is
switched off.
This is not a fault.
Once a drink has been dispensed or the machine
has been switched off, the internal fan will continue
to run until the interior is sufficiently dehumidified.
The brew unit cannot be
removed.
The brew unit is not positioned correctly.
If necessary, move the handle on the brew unit
back to the start position. Close the machine door.
Switch the coffee machine off.
Wait approx.1minute before switching the coffee
machine back on.
This will initialise the brew unit motor and put it back
into the start position.
If necessary, repeat these steps.
Coffee dispensing is re-
peatedly interrupted
and the message Fill the
bean container appears in
the display.
This is not a fault.
The brew unit has not detected the ground coffee.
Certain types of coffee produce a small amount of
coffee when they are ground. In such cases, the
grinder is usually set to fine and the minimum
quantity of coffee is set.
Confirm the message withOK.
If the display appears with all types of coffee:
Set the grinder to a coarser setting (see “Grinder
setting”).
Select a larger quantity of coffee.
Don’t forget to check any drinks changed in
“Profiles”.
If the message only appears when dispensing certain
drinks:
Check the quantity of coffee set for this drink (see
“Quantity of coffee”). Select a larger quantity of
coffee.
You may also need to set a coarser grinder setting.