Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Guide to the machine
- Operation
- Miele@home
- Before using for the first time
- Bean system
- Filling the water container
- Switching on and off
- Spout adjustment
- Making drinks
- Expert mode
- Grinder setting
- Parameters
- Portion size
- Resetting drinks
- Profiles
- Profiles: creating and editing drinks
- MyMiele
- MobileStart
- Settings
- Displaying and changing settings
- Language
- Time
- Date
- Start screen
- Timer
- Volume
- Display
- Lighting
- Info (display information)
- Fresh water
- Altitude
- Performance mode
- Water hardness
- Movement sensor
- System lock
- _
- Remote control
- SuperVision
- RemoteUpdate
- Software version
- Legal information
- Showroom programme (demo mode)
- Factory defaults
- Cleaning and care
- Overview of cleaning intervals
- Cleaning by hand or in the dishwasher
- Unsuitable cleaning agents
- Cleaning the drip tray and waste container
- Cleaning the drip tray cover
- Water container
- Cleaning the central spout
- Cleaning the cup rim sensor
- Cleaning the milk flask with lid
- Cleaning the milk valve (daily)
- Removing and cleaning the milk valve (once a month)
- Cleaning the bean containers
- Removing the brew unit and cleaning it by hand
- Cleaning the interior, inside of the machine door and drip tray
- Cleaning the front of the machine
- Maintenance programmes
- Rinsing the machine
- Rinsing the milk pipework
- Maintenance programme:
- Degreasing the brew unit and cleaning the interior
- Descaling the machine
- Automatic cleaning and descaling
- Problem solving guide
- After sales service and warranty
- Accessories
- Installation
- Technical data
- EU Conformity declaration
- UK Conformity declaration
- Copyrights and Licences
Cleaning and care
75
Wipe any coffee grounds from the
filters. One filter is located in the
funnel. The other filter can be found
to the left of the funnel.
Dry the funnel to prevent ground
coffee sticking to it the next time a
coffee is made.
Cleaning the inside of the appliance
Use your vacuum cleaner to remove
dry coffee grounds.
Clean the niche of the brew unit with
a damp, clean cloth. Clean the areas
marked in white in the illustration, e.g.
around the drive shaft, especially
well.
Replacing the brew unit
Proceed in the reverse order: push
the brew unit back into the coffee
machine. Tilt the brew unit forward a
little when doing this.
Press the button under the handle of
the brew unit and, whilst doing so,
turn the handle backwards.
Tip: If you are unable to turn the brew
unit handle, apply firm pressure to the
sides of the brew unit.
Push the water container into the
coffee machine.
The process of removing and inserting
the brew unit causes ground coffee to
drop onto the drip tray.
Remove the drip tray and clean the
lid.
Push the drip tray back into the
coffee machine and close the
machine door.
Cleaning the interior, inside of
the machine door and drip tray
Clean the interior and front of the
machine as part of the normal cleaning
process. For instance, if you remove the