Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Guide to the machine
- Operation
- Miele@home
- Before using for the first time
- Bean system
- Filling the water container
- Switching on and off
- Spout adjustment
- Making drinks
- Expert mode
- Grinder setting
- Parameters
- Portion size
- Resetting drinks
- Profiles
- Profiles: creating and editing drinks
- MyMiele
- MobileStart
- Settings
- Displaying and changing settings
- Language
- Time
- Date
- Start screen
- Timer
- Volume
- Display
- Lighting
- Info (display information)
- Fresh water
- Altitude
- Performance mode
- Water hardness
- Movement sensor
- System lock
- _
- Remote control
- SuperVision
- RemoteUpdate
- Software version
- Legal information
- Showroom programme (demo mode)
- Factory defaults
- Cleaning and care
- Overview of cleaning intervals
- Cleaning by hand or in the dishwasher
- Unsuitable cleaning agents
- Cleaning the drip tray and waste container
- Cleaning the drip tray cover
- Water container
- Cleaning the central spout
- Cleaning the cup rim sensor
- Cleaning the milk flask with lid
- Cleaning the milk valve (daily)
- Removing and cleaning the milk valve (once a month)
- Cleaning the bean containers
- Removing the brew unit and cleaning it by hand
- Cleaning the interior, inside of the machine door and drip tray
- Cleaning the front of the machine
- Maintenance programmes
- Rinsing the machine
- Rinsing the milk pipework
- Maintenance programme:
- Degreasing the brew unit and cleaning the interior
- Descaling the machine
- Automatic cleaning and descaling
- Problem solving guide
- After sales service and warranty
- Accessories
- Installation
- Technical data
- EU Conformity declaration
- UK Conformity declaration
- Copyrights and Licences
Cleaning and care
74
Removing the brew unit and
cleaning it by hand
The moving parts of the brew unit
are lubricated. Cleaning agents will
damage the brew unit.
Only clean the brew unit by hand
with warm water. Do not use any
cleaning agents.
Remove and clean the brew unit once a
week. Also clean the area below the
brew unit once a week.
Open the appliance door.
Remove the water container.
Press the button under the handle of
the brew unit and, whilst doing so,
turn the handle forwards.
First, pull the brew unit sideways
and then slide it out forwards. Tilt
the brew unit forwards.
If you cannot remove the brew unit or
can only do so with difficulty, the brew
unit is not in the correct position (see
“Problem solving guide”).
When you have removed the brew
unit, do not change the position of
the handle on the brew unit.
Otherwise, the brew unit cannot be
reinserted.
Clean the brew unit by hand under
warm running water without using
cleaning agent.