Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Guide to the machine
- Operation
- Miele@home
- Before using for the first time
- Bean system
- Filling the water container
- Switching on and off
- Spout adjustment
- Making drinks
- Expert mode
- Grinder setting
- Parameters
- Portion size
- Resetting drinks
- Profiles
- Profiles: creating and editing drinks
- MyMiele
- MobileStart
- Settings
- Displaying and changing settings
- Language
- Time
- Date
- Start screen
- Timer
- Volume
- Display
- Lighting
- Info (display information)
- Fresh water
- Altitude
- Performance mode
- Water hardness
- Movement sensor
- System lock
- _
- Remote control
- SuperVision
- RemoteUpdate
- Software version
- Legal information
- Showroom programme (demo mode)
- Factory defaults
- Cleaning and care
- Overview of cleaning intervals
- Cleaning by hand or in the dishwasher
- Unsuitable cleaning agents
- Cleaning the drip tray and waste container
- Cleaning the drip tray cover
- Water container
- Cleaning the central spout
- Cleaning the cup rim sensor
- Cleaning the milk flask with lid
- Cleaning the milk valve (daily)
- Removing and cleaning the milk valve (once a month)
- Cleaning the bean containers
- Removing the brew unit and cleaning it by hand
- Cleaning the interior, inside of the machine door and drip tray
- Cleaning the front of the machine
- Maintenance programmes
- Rinsing the machine
- Rinsing the milk pipework
- Maintenance programme:
- Degreasing the brew unit and cleaning the interior
- Descaling the machine
- Automatic cleaning and descaling
- Problem solving guide
- After sales service and warranty
- Accessories
- Installation
- Technical data
- EU Conformity declaration
- UK Conformity declaration
- Copyrights and Licences
Cleaning and care
68
Clean the area around the central
spout with a damp cloth.
Reassembling the central spout
The dispensing unit is easier to
reassemble if the individual parts are
dampened with water beforehand.
Make sure that all parts are tightly
connected to one another.
Fit the dispensing unit back together.
Press down firmly so that the spouts
become securely connected to the
holder.
Insert the dispensing unit into the
coffee machine and connect the milk
pipework.
Refit the stainless steel cover.
Close the appliance door.
Fit cover to central spout will appear in the
display.
Confirm the message withOK.
Cleaning the cup rim sensor
The cup rim sensor is located under the
central spout.
Clean the cup rim sensor at least once
a week and more often if heavily soiled.
Press the two retainers together (see
arrows).
The cup rim sensor is released.
The cup rim sensor can be cleaned in
the dishwasher, or by hand using
warm water and a little washing-up
liquid.
To refit the cup rim sensor, press it
into the holder on the central spout
from below.