Operating instructions/Installation instructions

Before using for the first time
28
The coffee machine is now successfully
set up for use. You can now fill the bean
system.
Setting up the bean system
After setting up the coffee machine, you
will be prompted to set up the bean
system. The coffee machine will assist
you when first filling and naming the
bean containers.
 TouchYes.
If you select No, the assistant for
setting up the bean system will not be
shown again.
Filling the bean containers
The coffee machine has 2bean
container drawers on the top left and
right.
 Open the machine door.
 Pull the bean containers out and take
off the lids.
 Fill the bean containers with roasted
coffee beans.
 Put the lids back on the bean
containers to seal them.
 Push the bean containers all the way
back into the coffee machine. Close
the machine door.
Tip: Make a note of each type of bean.
After filling the bean containers, you
can now name the types of beans.
Naming the types of beans
The 3bean containers are shown in the
display as follows and are pre-named.
Type of beans
Type A Type B
Type C
If you rename the bean containers,
please note the following:
- It is best to select short names.
- If you are using the same type of
beans in 2or3bean containers at
the same time (for instance because
you only use one type of bean), make
sure you name them in exactly the
same way.
Name type of beans for bean container?
appears in the display and Type A is
highlighted in orange.
 TouchYes.
The editor will open in the display.
 Enter the name you want for the bean
container and then touch Save.
 Now name the other 2bean
containers.
<Type XY> Allocate “” will appear in the
title bar of the display.