Operating and installation instructions Built-in coffee machine To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. en-GB M.-Nr.
Caring for the environment Disposing of the packaging material Disposing of your old appliance The packaging material is used for handling and protects the appliance from transport damage. The packaging material used is selected from materials which are environmentally friendly for disposal and can generally be recycled. Electrical and electronic appliances contain many valuable materials.
Contents Caring for the environment .............................................................................. 2 Warning and Safety instructions...................................................................... 7 Guide to the machine ....................................................................................... 17 Operation............................................................................................................ Touch display ...........................................
Contents Parameters......................................................................................................... Displaying and changing parameters .................................................................. Quantity of coffee................................................................................................ Brewing temperature ........................................................................................... Pre-brewing the ground coffee.............................
Contents Performance mode.............................................................................................. Eco mode ....................................................................................................... Barista mode .................................................................................................. Latte mode ..................................................................................................... Party mode ...........................................
Contents The Miele cleaning cartridge ............................................................................... Replacing the cleaning cartridge......................................................................... Automatic descaling............................................................................................ The Miele descaling cartridge ............................................................................. Maintenance Timer...................................................
Warning and Safety instructions This coffee machine complies with all the stipulated safety requirements. Inappropriate use can, however, lead to personal injury and material damage. Read the operating instructions carefully before using the coffee machine. They contain important information on safety, installation, use and maintenance. This prevents both personal injury and damage to the coffee machine.
Warning and Safety instructions Correct application This coffee machine is intended for home use. This coffee machine is not intended for outdoor use. This coffee machine must not be used at altitudes above 2000 m. It must only be used as a domestic appliance to make espresso, cappuccino, latte macchiato, tea etc. Any other use is not permitted.
Warning and Safety instructions Safety with children Danger of burning and scalding on the dispensing spouts. Children's skin is far more sensitive to high temperatures than that of adults. Ensure children do not touch hot surfaces of the coffee machine or place parts of their body under the dispensing spouts. Install the coffee machine where it is out of the reach of children. Children under 8 years of age must be kept away from the coffee machine unless they are constantly supervised.
Warning and Safety instructions Technical safety Installation work or repairs should only be carried out by a Miele authorised technician. Unauthorised or incorrect installation work or repairs can pose considerable danger to users. A damaged coffee machine could be dangerous. Before building in the machine, check it for any externally visible damage. Do not use a damaged machine.
Warning and Safety instructions The coffee machine must not be used in a non-stationary location (e.g. on a ship). For safety reasons, this machine may only be used when it has been built in. If the coffee machine is to be built in above another appliance, there must be a full-width, closed shelf between them (except when it is combined with a suitable built-in plate/food warming drawer). Only use the coffee machine in rooms where the ambient temperature is between +16 °C and +38 °C.
Warning and Safety instructions Mains water connection Do not connect the coffee machine to a hot water supply. The stopcock must be easily accessible after the coffee machine has been built in. The protective sleeve of the water inlet hose must not be damaged or become kinked. The integrated water protection system offers protection from water damage, provided the following conditions are met: - The coffee machine is correctly installed, connected to the electricity supply and plumbed in.
Warning and Safety instructions Correct use Danger of burning and scalding on the dispensing spouts. The liquids and steam dispensed are very hot. Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed. Do not touch hot components. Hot liquid or steam could spatter from the nozzles. Ensure that the central spout is clean and fitted correctly. Before opening the door, remove any containers from the drip tray in the machine door.
Warning and Safety instructions Do not use green (unroasted) coffee beans or mixtures of coffee beans which contain green coffee beans. Green coffee beans are very hard and still contain residual moisture. These can damage the coffee machine grinder as soon as grinding begins. Do not use coffee beans which have been treated with caramel, sugar or other substances including sugary liquids. Sugar will damage the coffee machine.
Warning and Safety instructions Accessories and spare parts Miele can only guarantee the safety of the machine when original Miele spare parts are used. Faulty components must only be replaced by genuine Miele original spare parts. Only use original Miele accessories. If other parts are used, warranty, performance and/or product liability claims will be invalidated.
Warning and Safety instructions For machines with stainless steel surfaces: Do not use sticky notes, transparent adhesive tape, masking tape or other types of adhesive on the stainless steel surfaces. These will damage the stainless steel surfaces, causing them to lose their dirtrepellent protective coating. The finish on stainless steel surfaces is susceptible to scratching. Even magnets can cause scratching.
Guide to the machine Exterior view 1 2 3 4 5 6 7 8 11 9 10 a On/Off button b Optical interface (for the Miele Customer Service Department only) c MobileStart sensor d Movement sensor e “Back” sensor f Touch display g “Light” sensor h Door handle i Height-adjustable central spout with lighting j Drip tray cover k Milk flask 17
Guide to the machine Interior view a Bean containers (Type A and Type C) b Milk valve c Height-adjustable central spout with lighting d Grinder setting e Bean container (Type B) f Fan outlet g Water container h Drip tray with lid i Brew unit j Waste container k Maintenance container l Receptacles for cleaning and descaling cartridges (including adapters) m Drip tray 18
Operation Touch display The delicate touch display can be scratched by pointed or sharp objects, e.g. pens. Only touch the display with your fingers. The touch display is split into multiple areas. Miele 12:00 Ristretto Espresso Coffee Long coffee Profiles The menu path appears on the left of the header. If you touch a menu name in the header, the display will switch to that menu. To switch to the start screen, touch . The time of day is shown on the right of the header.
Operation Operating actions All the selectable options are displayed in black or white according to your selected colour scheme. Each time you touch a possible option, the relevant characters (word and/or symbol) light up orange. Selecting a menu option Touch the field or value you want in the display. Scrolling You can scroll left or right. Swipe the screen by placing your finger on the touch display and moving it in the direction you want.
Operation OK Select the value you want: as soon as you enter a valid value, OK turns green. Use the arrow to delete the last entered number. Confirm with OK. Entering a name Letters are entered using a keyboard. It is best to select short names. Touch the letters or characters you want. Tip: Use the arrow to delete the last entered character. Touch Save. Displaying the context menu When you are in certain menus, a context menu can be displayed, e.g. for configuring drinks.
Operation Help Context-sensitive help is available for certain functions. In this case, Help appears in the bottom line. Touch Help to display information in text and pictures. Touch Close to return to the previous menu. Pull-down menu Among other things, the pull-down menu provides access to a schematic representation of the bean containers and to Expert mode. Touch the orange line at the top edge of the screen and drag down with your finger. Active settings are highlighted in orange.
Operation Symbols in the display The display shows symbols as well as text, e.g. symbols for the various drinks. Some of these are explained below. Symbol Explanation This symbol indicates that there is additional information and advice about using the coffee machine. Select OK to confirm the information. This symbol indicates the “Settings” menu and the “Language” menu option. This symbol appears if the system lock is activated. Operation is locked.
Miele@home Your coffee machine is equipped with an integrated WiFi module. To use this feature, you will need: - A WiFi network - The Miele app - A Miele user account. You can create a user account via the Miele app. The Miele app will guide you through the process of connecting your coffee machine to your home WiFi network.
Before using for the first time Before using for the first time Connect the coffee machine to the water and electricity supplies. Install the coffee machine by building it in. Remove any notices from the machine. Tip: You can also choose to set up Miele@home for your coffee machine at a later point. In this case, select Skip. Make sure that your WiFi network signal is sufficiently strong in the place where you want to set up your coffee machine. Touch Continue.
Before using for the first time Selecting the water supply (Mains water) The coffee machine is intended to be plumbed into the mains water supply. You can select one of the following options: - On: The water container will be filled automatically via the mains water connection. - Off: You must fill the water container manually. A message appears in the display to inform you of this. Select the option you want. Remove the maintenance container on the left-hand side.
Before using for the first time Put the maintenance container back inside the coffee machine and close the appliance door. The descaling cartridge will fill with water the next time the machine is switched off. Always wait for the coffee machine to switch itself off. Do not force the machine to switch off. Screw the cleaning cartridge into the holder upside down. Push the holder and cartridge into the coffee machine until the holder audibly clicks into place.
Before using for the first time The coffee machine is now successfully set up for use. You can now fill the bean system. Push the bean containers all the way back into the coffee machine. Close the machine door. Setting up the bean system Tip: Make a note of each type of bean. After setting up the coffee machine, you will be prompted to set up the bean system. The coffee machine will assist you when first filling and naming the bean containers.
Before using for the first time Allocating types of beans Now you need to allocate the drinks to the types of beans. Selected drinks are highlighted in orange. Now select the drinks that are to be prepared with this type of bean. Confirm your selection with OK. Now it is time to allocate the next type of bean. The coffee drinks that have not yet been allocated are displayed. Select the drinks that are to be prepared with this type of bean. Confirm with OK.
Bean system Coffee or espresso can be made from whole roasted coffee beans which are freshly ground for each portion. Your coffee machine has a bean system with 3 bean containers which can be filled with different types of beans or even just one type. You can allocate bean types to individual coffee drinks however you like. Alternatively, you can create your own user profiles that do not have the same bean types allocated to the coffee drinks as the Miele profiles.
Bean system If you switch from having identical names to having different names, you will then need to allocate coffee drinks to the newly named type of bean. Changing how the bean containers are allocated If you have created extra user profiles for coffee drinks in addition to the Miele standard profile, the bean types can be individually allocated to the drinks in each profile. Touch Change allocation. If you have set up 1 or more profiles and at least 1 coffee drink, first select the profile.
Filling the water container Risk to health due to contaminated water. Bacteria can develop in water which has been sitting in the water container for too long and is a risk to your health. Water that gets left in the inlet hose can also impair the flavour if you do not make any drinks for a long time. Change the water in the water container every day. Discard the first full container of water if you have not made any drinks for a while. Open the appliance door.
Switching on and off Switching the coffee machine on Switching off for longer periods of time Touch the On/Off button . If the coffee machine is not going to be used for a while, e.g. if you are going on holiday, remember to do the following: The coffee machine heats up and rinses the pipework. Hot water will run out of the central spout. You can now make drinks. If the coffee machine is already at operating temperature, rinsing will not take place.
Spout adjustment The central spout cannot be manually adjusted. Before making the drink, the central spout moves down and the cup sensor stops it at the optimum height for the cups or glasses being used. When the coffee machine is switched off, the central spout will be in the middle position. When a maintenance programme is being carried out, the central spout will move to the height of the maintenance container or into a low maintenance position.
Making drinks Danger of burning and scalding on the dispensing spouts. The liquids and steam dispensed are very hot and can cause scalding. Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed. Do not touch hot components. Making coffee with and without milk The following drinks can be made: - Ristretto is a strong, concentrated espresso. It is prepared with the same amount of coffee as for an espresso but with a lot less water.
Making drinks Milk preparation Milk or milk alternatives (e.g. soya milk) containing added sugar can clog up the milk pipe and the rest of the milk pipework. Residues from unsuitable liquids can interfere with milk preparation. The milk used must not contain any additives. Only use pasteurised cow's milk. Tip: Using cold cow's milk (< 10 °C) with a protein content of at least 3 % will produce the perfect milk froth. You can select milk with a fat content according to preference. With whole milk (at least 3.
Making drinks Filling and inserting the milk flask Making a coffee Fill the milk flask with milk up to a maximum of 2 cm below the rim. Seal the milk flask with the lid. Place a container underneath the central spout. Select a coffee drink. Push the milk flask back into the coffee machine until it clicks into place. Tip: It is easier to remove the milk flask with both hands. Preparation will begin and the coffee will be dispensed into the container from the central spout.
Making drinks DoubleShot Making 2 portions Select the DoubleShot function if you would like a particularly strong and aromatic coffee. In this case, more coffee beans will be ground and brewed halfway through the brewing process. The shorter extraction time means that fewer unwanted aromas and bitter compounds will be released. You can dispense 2 portions of a drink into 1 large cup or into 2 cups at the same time. DoubleShot can be activated for all drinks apart from “Ristretto” and “Long black”.
Making drinks Coffee pot You can make several cups of coffee one after the other automatically with the Coffee pot function (maximum of 1 litre). The drinks menu is displayed. Tip: Make sure that the bean and water containers have enough beans and water inside them before starting the Coffee pot function. Place a sufficiently large container under the central spout. Select Coffee pot. Tip: You will find Coffee pot at the end of the drinks menu. Select the number of cups you want (3 to 8).
Making drinks - Chai latte has its origins in traditional Ayurveda medicine as a black tea with typically Indian spices and milk. The milk mellows the spices and tops off the flavour experience. Dispensed temperature: approx. 97 °C, brewing time: approx. 3 minutes - Herbal tea is an aromatic infusion drink made up of dried leaves or fresh parts of plants. Dispensed temperature: approx. 97 °C, brewing time: approx. 8 minutes - Fruit tea is made from dried pieces of fruit and/or parts of plants, e.g.
Making drinks The drinks menu is displayed. Teapot Touch the sensor. Select the setting you want. The Teapot function allows you to make a large quantity of tea (maximum of 1 litre). The type of tea selected determines the preset temperature. Making tea The drinks menu is displayed. The drinks menu is displayed. Tip: Make sure that the water container has enough water inside it before you start making a pot of tea. Select Settings | Timer | TeaTimer.
Expert mode In Expert mode, you can allocate a bean type temporarily and change the portion size while the drink is being made. The setting will not be saved and will only apply for the current drink. Activating and deactivating Expert mode Expert mode is located in the pull-down menu at the top edge of the screen. Touch the top edge of the screen in the middle and drag down with your finger to open Expert mode. The schematic representation of the bean containers is displayed. Touch Expert mode.
Grinder setting The grinder setting determines the contact time between the ground coffee and the water, known as the extraction time. When the ideal grinder setting is selected, the machine dispenses a perfect cup of coffee with a fine, hazelnut-brown crema. The grinder setting you select will be used for all coffee drinks. There are various ways to tell whether the coffee grinder is set correctly. The grinder setting is too coarse if the coffee or espresso is watery and tastes acidic.
Parameters Displaying and changing parameters You can individually adjust the following parameters for each drink: - Type of beans - Amount of coffee - Brew temperature - Pre-brewing You can adjust the brewing temperature for making tea and dispensing warm and hot water. The drinks menu is displayed. Touch the name of the drink you want and keep your finger on it until the associated context menu appears. Select Parameters. The Parameters menu is displayed. Select the parameter you want.
Parameters Type of beans You can display which type of bean is currently being used for this coffee drink or change which bean container is allocated to it.
Portion size You can adjust the amount of water for all coffee drinks, hot water and types of tea. The strength of the coffee is determined by the ratio between the amount of ground coffee and water. If the coffee is brewed with more water but with the same quantity of coffee, the coffee will taste milder and thinner. If you reduce the amount of water, you will get a stronger and more powerful coffee.
Resetting drinks You can reset portion sizes and parameters to their factory default settings for individual drinks or for all drinks. The drinks menu is displayed. Touch the drink you want and keep your finger on it until the context menu opens. Select Reset and confirm with Yes. The portion size and parameters are reset to their factory default settings. The allocated bean type remains stored.
Profiles In addition to the Miele drinks menu (Miele profile), you can create individual profiles to cater for different tastes and preferences. Within the profile, you can adjust the portion sizes and parameters individually for all drinks. The name of the current profile is shown in the top left of the display. Creating a profile The drinks menu is displayed. Touch Profiles. The Profiles menu opens. Touch Create profile. The editor will open in the display.
Profiles: creating and editing drinks You can save frequently made drinks in a profile with your own individual settings (see “Profiles”). Touch the name of the drink and keep your finger on it until the context menu appears. You can also change the names of your drinks and delete any unwanted drinks from your profile. You can save a maximum of 9 drinks in a profile. Edit the entry as required. Creating a drink You can create new drinks based on existing drinks. The drinks menu is displayed.
MyMiele You can display drinks you make frequently, drinks from profiles and maintenance programmes in the MyMiele screen. Tip: You can also set menu options that you have entered in MyMiele as your start screen (see “Settings – Start screen”). The main menu is displayed. Touch MyMiele. You can now configure MyMiele. MyMiele: adding an entry Touch Add entry. You can now add entries from the following menus: - Drinks - Profiles - Maintenance Select an entry. Confirm the message with OK.
MobileStart With MobileStart you can, for example, start making a drink via the Miele app. You will only be able to use MobileStart if Miele@home has been set up for your coffee machine. Danger of burning and scalding on the dispensing spouts. If liquids or steam are dispensed while the machine is unsupervised, persons may burn themselves if they place body parts under the central spout or touch hot components.
Settings You can personalise your coffee machine by adapting the factory default settings to suit your requirements. - Night dimming: To save energy, the time is only displayed between 5 am and 11 pm. Displaying and changing settings Clock type Touch the sensor. The time of day can be displayed in analogue (clock face) or digital (hours: minutes plus date) format when the coffee machine is switched off. Select Settings. Clock format Select the option you want to change.
Settings “MyMiele”). The new start screen will appear when the coffee machine is next switched on. The drinks menu is set as the start screen by default. Timer Appliance timer You can set different times for the timer at the weekend (Sat. and Sun.) and/or from Monday to Friday (Monday-Friday). Alternatively, you can select Daily to use the same timer settings every day. Tip: If you are unable to set the timers because the screen is greyed out, touch On to enable timer adjustment.
Settings TeaTimer You can use the TeaTimer to start a minute minder when making tea (see “Making drinks – TeaTimer”). Volume You can set the volume of the buzzer and keypad tones using the bar chart. Display Brightness The display brightness is adjusted via a bar with seven segments. Colour scheme Choose between a light or dark colour scheme for the display.
Settings Performance mode You can select the appropriate performance mode for how you use your machine. Eco mode is set by default. Eco mode Eco mode is an energy-saving mode. The system does not heat up until someone starts making a drink. Before switching off the coffee machine, empty the drip tray and fill the water container so that any pending maintenance programmes are able to run. Clean the coffee machine thoroughly after intensive use, particularly the milk pipework.
Settings If you are using bottled drinking water, e.g. mineral water, select settings according to the calcium content. The calcium content is specified on the label 2+ of the bottle in mg/l Ca or ppm 2+ (mg Ca /l). Do not use carbonated water. The hardness level is set to 21 °dH by default. Water hardness °dH mmol/l Calcium content mg/l Ca 2+ Setting s or ppm (mg Ca 56 2+ /l) Water hardness °dH mmol/l Calcium content mg/l Ca 2+ Setting s or ppm (mg Ca 2+ /l) 21 3.8 150 21 22 3.
Settings Movement sensor The movement sensor detects when you approach the touch display with your hand or body. You can activate the following functions individually: - Switch the light on: You can decide whether the light should come on when the coffee machine is on or off. - Acknowledge buzzer: Buzzer sounds are suppressed, e.g. in the event of the message Fill and replace the water container. - Switch the appliance on: The start screen is displayed. The movement sensor is deactivated by default.
Settings The network configuration should be reset whenever the coffee machine is being disposed of or sold, or if a used coffee machine is being put into operation. This is the only way to ensure that all personal data has been removed and the previous owner will no longer be able to access the coffee machine. * This menu option appears if Miele@home has been set up and the coffee machine has – where applicable – been connected to a WiFi network.
Settings Activating/deactivating Software version The RemoteUpdate function is activated by default. Available updates will be downloaded automatically but will only be installed if you initiate installation manually. The “Software version” menu option is intended for the Miele Customer Service Department. You do not need this information for domestic use. Deactivate RemoteUpdate if you do not want any updates to be downloaded automatically.
Settings The following will not be reset: - The number of drinks dispensed and the machine status (No. of portions until machine needs descaling, ... brew unit needs degreasing) - Language - Time and date - Profiles and their associated drinks (the allocation of bean types to drinks is reset) - Miele@home The Maintenance timer is reset to 2:00 h.
Cleaning and care Risk to health due to inadequate cleaning Heat and moisture inside the coffee machine can cause coffee residues to become mouldy and/or milk residues to go off and pose a risk to health. Carefully clean the coffee machine regularly.
Cleaning and care Cleaning by hand or in the dishwasher The brew unit is not dishwasher safe. Clean the brew unit by hand only under warm running water. Do not use washing-up liquid or any other cleaning agent. The following components must be cleaned by hand only: - Central spout stainless steel cover - Brew unit - Bean containers and lids Risk of damage as a result of excessively high dishwasher temperatures. Components may be ruined (e.g.
Cleaning and care Danger of burning and scalding on hot components or by hot liquids. Components can become very hot during operation. Touching hot components can cause burning. The liquids and steam dispensed are very hot and can cause scalding. Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed. Always allow the coffee machine to cool down before cleaning it. Please be aware that water in the drip tray can also be very hot.
Cleaning and care - Steel wool or stainless steel wire scourers Cleaning the drip tray and waste container Danger of burning and scalding on hot components or by hot liquids. Components can become very hot during operation. Touching hot components can cause burning. The liquids and steam dispensed are very hot and can cause scalding. If the pipework has just been rinsed, wait a while before removing the drip tray. Please be aware that water in the drip tray can also be very hot.
Cleaning and care Clean the drip tray, lid and waste container in the dishwasher or wash them by hand using warm water and a little washing-up liquid. Reassembling the drip tray Dry all parts thoroughly. Clean the inside of the coffee machine underneath where the drip tray goes. Cleaning contacts Attach the drip tray lid as follows: slide the lid under the lug next to the contacts and apply pressure to the lid until the catches at the sides audibly click into place.
Cleaning and care Cleaning the drip tray cover Remove the drip tray cover as follows: apply pressure to the rear edge so that the cover tips forwards and you can remove it easily. The drip tray cover can be cleaned in the dishwasher, or by hand using warm water and a little washing-up liquid. Dry the drip tray cover. Refit the drip tray cover. Water container Clean the water container by hand every day with warm water and a little washing-up liquid.
Cleaning and care Detach the milk pipework from the dispensing unit as follows: pull the tab to the left. Do not remove the milk pipework connecting piece. If necessary, clean the connecting piece with the cleaning brush. Grip the dispensing unit by the sides and pull it down to remove it. Take the dispensing unit apart, separating it into 3 components: the Y-piece, the spouts and the holder. Clean all parts thoroughly.
Cleaning and care Refit the stainless steel cover. Close the appliance door. Fit cover to central spout will appear in the display. Confirm the message with OK. Cleaning the cup rim sensor The cup rim sensor is located under the central spout. Clean the area around the central spout with a damp cloth. Clean the cup rim sensor at least once a week and more often if heavily soiled.
Cleaning and care Cleaning the milk flask with lid The milk flask should be taken apart and cleaned every day after use. Both the lid and the glass flask can be cleaned in the dishwasher, or by hand using warm water and a little washingup liquid. Remove and empty the milk flask. Clean the milk flask holder on the coffee machine with a damp cloth. Cleaning the milk valve (daily) The milk valve seal can be damaged by objects with sharp edges or similar.
Cleaning and care Open the appliance door. Clean the milk valve with a damp cloth/microfibre cloth. Close the appliance door. Removing and cleaning the milk valve (once a month) If the following issues occur during milk preparation, the milk valve may be blocked: only hot milk is dispensed instead of milk froth, the milk sprays out. Clean the milk valve more often if necessary. The milk valve cover should only be cleaned by hand. Open the appliance door.
Cleaning and care Press the latches on the left and right-hand sides of the milk valve holder and pull the holder forwards to remove it. Pull the stainless steel bolt upwards and out. Clean the individual components of the milk valve in the dishwasher. Tip: If there are any dry milk residues on the front, soak the stainless steel bolt in warm water and a little washingup liquid. Fitting the milk valve Insert the stainless steel bolt from above.
Cleaning and care Connect together the angular moulded hose and longer milk pipework. Start by attaching the moulded hose to the top of the central spout. The black connecting piece should be pointing to the rear. Tip: If necessary, turn the milk pipework towards the back at the connecting piece on the right-hand side. Then, connect the bottom end of the moulded hose to the dispensing unit. Insert the milk pipework into the milk valve on the left and right-hand sides.
Cleaning and care Cleaning the bean containers Risk of damage from incorrect use and cleaning. Immersing the bean containers in liquids can result in malfunctions. If they are taken apart, bits may break off or the mechanism may no longer work properly once they are reassembled. Do not disassemble the bean containers. Do not immerse the bean containers in liquids, e.g. soapy water. Coffee beans contain oils which can deposit themselves on the walls of the bean containers and hinder the flow of the beans.
Cleaning and care Removing the brew unit and cleaning it by hand The moving parts of the brew unit are lubricated. Cleaning agents will damage the brew unit. Only clean the brew unit by hand with warm water. Do not use any cleaning agents. Remove and clean the brew unit once a week. Also clean the area below the brew unit once a week. Open the appliance door. Remove the water container. First, pull the brew unit sideways and then slide it out forwards . Tilt the brew unit forwards .
Cleaning and care Replacing the brew unit Proceed in the reverse order: push the brew unit back into the coffee machine. Tilt the brew unit forward a little when doing this. Wipe any coffee grounds from the filters. One filter is located in the funnel. The other filter can be found to the left of the funnel. Dry the funnel to prevent ground coffee sticking to it the next time a coffee is made. Cleaning the inside of the appliance Use your vacuum cleaner to remove dry coffee grounds.
Cleaning and care water container, use this as an opportunity to clean the area under the water container at the same time. Put all the parts back in place, including the drip tray. Close the machine door. Cleaning the front of the machine The drip tray is located at the bottom on the inside of the machine door. Remove and empty the drip tray on a regular basis. The drip tray is dishwasher safe. Open the machine door. Remove and clean the drip tray.
Cleaning and care Maintenance programmes Rinsing the milk pipework The coffee machine has maintenance programmes for: If you have made a drink with milk, the coffee machine will rinse the milk pipework automatically after a few minutes. You can also start the Rinse the milk pipework function manually.
Cleaning and care Cleaning the milk pipework with the cleaning agent for milk pipework (sticks) If automatic cleaning is switched off, the milk pipework must be cleaned after 15 days at the latest. Messages appear in the display to prompt you to clean. For optimum cleaning results, we recommend Miele cleaning agent for milk pipework. The cleaning agent for milk pipework has been specially developed for use with Miele coffee machines and prevents subsequent damage.
Cleaning and care be degreased regularly in order to ensure aromatic coffee and trouble-free operation of the coffee machine. You can run the maintenance programme with the Miele cleaning cartridge or with cleaning tablets for degreasing the brew unit. The maintenance programme lasts for approx. 10 minutes. If you have switched on automatic cleaning and fitted a ready-to-use cleaning cartridge, the Degrease the brew unit maintenance programme will run using the cleaning cartridge.
Cleaning and care First, pull the brew unit sideways and then slide it out forwards . Tilt the brew unit forwards . If you cannot remove the brew unit or can only do so with difficulty, the brew unit is not in the correct position (see “Problem solving guide”). When you have removed the brew unit, do not change the position of the handle on the brew unit. Otherwise, the brew unit cannot be reinserted. Clean the brew unit by hand under warm running water without using cleaning agent.
Cleaning and care Dropping a cleaning tablet into the brew unit The cleaning process is complete when the drinks menu appears. Descaling the machine Risk of damage from spilt descaling solution. Sensitive surfaces and/or natural floors can suffer damage. Wipe up any spillages of descaling agent immediately. Drop a cleaning tablet into the top of the brew unit (arrow). Push the brew unit containing the cleaning tablet back into the coffee machine.
Cleaning and care descaling becomes absolutely essential. This number is indicated whenever a drink is made. Confirm the message with OK. When the number of remaining portions reaches 0, the coffee machine will lock out. You can switch the coffee machine off if you do not want to run the descaling programme at this point in time. You can not make any drinks until the machine has been descaled.
Cleaning and care Carrying out descaling Push the water container back into the machine. Follow the further instructions given in the display. When Rinse and refill the water container appears in the display: Remove the water container and rinse it thoroughly with clean water. Ensure that no descaling solution residue remains in the water container. Fill the water container with drinking water. The descaling process is complete when the drinks menu appears.
Automatic cleaning and descaling Risk of damage from spilt cleaning and descaling solution. Sensitive surfaces and/or natural floors can suffer damage. One way to catch the cleaning and descaling solution is to place the maintenance container under the central spout before switching off the machine. Clear up any spillages of cleaning and descaling solution.
Automatic cleaning and descaling - If filling the water container manually: the water container is inserted and is filled with water at least up to the mark. - Carry out the instructions which appear in the display before switchoff, e.g. Empty and refit the drip tray and the waste container. - The appliance door is closed when the programme is started. - The coffee machine is switched off.
Automatic cleaning and descaling The first message will appear when the cartridge is approx. 25 % full. Cleaning cartridges are available to order via the Miele webshop or directly from Miele (see back cover for contact details). If no cleaning cartridge has been fitted or if the fitted cartridge is empty or has expired, the milk pipework and brew unit must be cleaned manually.
Automatic cleaning and descaling Automatic descaling Automatic descaling takes approx. 12 minutes. Screw the new cartridge into the holder upside down. Push the holder and cartridge into the coffee machine until the holder audibly clicks into place. Put the maintenance container back inside the coffee machine and close the machine door. To ensure the longevity of components and a consistent environment free of limescale, the coffee machine needs to be manually descaled from time to time.
Automatic cleaning and descaling The descaling agent comes in the form of tablets in the descaling cartridge. The cartridge is filled with water when it is placed in the machine. The tablets gradually dissolve over time. - It should be transported with care and upright. Avoid shaking it. Shaking or turning upside down reduces the shelf life or damages the cartridge. The Miele descaling cartridge will last for up to 12 months of automatic descaling, depending on how often the coffee machine is used.
Automatic cleaning and descaling If you do not want to fit a descaling cartridge, seal the system with the adapter. Tip: You can seal the descaling cartridge with the cap that can be found on the cartridge. This cap can be easily detached by snapping it off. Insert the adapter in place of the cartridge. Dispose of the cartridge with your household waste. Maintenance Timer Fitting the descaling cartridge Insert the cartridge and push it upwards as far as it will go.
Automatic cleaning and descaling The start time is saved. From now on, the automatic maintenance programmes will commence at the desired time each day. Cancelling automatic cleaning and descaling You can cancel the automatic cleaning programmes during the activation phase. If the automatic cleaning programme is not performed five times in a row, the dispensing of drinks is blocked. You will only be able to make drinks again once the brew unit has been degreased and/or the milk pipework has been cleaned.
Problem solving guide Many malfunctions and faults that can occur in daily operation can be easily remedied. Time and money will be saved because a service call will not be needed. The following guide may help you to find the reason for a malfunction or a fault, and to correct it. Messages in the display Error messages must be confirmed with OK, otherwise the message can reappear in the display even though the problem has been remedied.
Problem solving guide Problem Cause and remedy F73 or The brew unit cannot be positioned correctly or is soiled. It is not possible to press the ground coffee. Check whether you can remove the brew unit. If you can remove the brew unit, rinse it under running water. Check the brew unit Push the coffee ejector of the brew unit into the correct position (see illustration). Place the water container in the coffee machine and close the machine door. Do not insert the brew unit.
Problem solving guide Problem Check water intake and empty the water container Cause and remedy The mains water supply is not working. Check whether the water inlet hose is kinked or the stopcock is not turned on completely. Remove and empty the water container. Insert the empty water container into the coffee machine. The following message is displayed: Please wait. Water container filling.. The water container fills up. To turn off the mains water connection, fill and insert the water container.
Problem solving guide Unusual performance of the coffee machine Problem Cause and remedy The display remains dark when the coffee machine is turned on using the On/Off button . The On/Off button was not held for long enough. Touch and hold the On/Off button for at least 3 seconds. The plug is not inserted in the socket correctly. Insert the plug into the socket. The fuse has tripped because the coffee machine, voltage or another appliance is defective.
Problem solving guide Problem Cause and remedy A fan can be heard even though no drinks are being prepared or the coffee machine is switched off. This is not a fault. Once a drink has been dispensed or the machine has been switched off, the internal fan will continue to run until the interior is sufficiently dehumidified. The brew unit cannot be The brew unit is not positioned correctly. removed. If necessary, move the handle on the brew unit back to the start position. Close the machine door.
Problem solving guide Problem Cause and remedy Drink dispensing is prematurely aborted even though there is a container under the central spout. This is not a fault. If the container has a very wide opening that prevents the cup rim sensor from making contact with the edge of the container (e.g. in the case of a very large cup), the drink will be cancelled. Use a different container or position the existing one so that the sensor can detect the rim.
Problem solving guide Faults with automatic cleaning and/or descaling Problem Cause and remedy After switching on, a message appears informing you that automatic cleaning and/or descaling could not be carried out. The coffee machine was not ready for operation: all removable parts, such as the water container, drip tray, brew unit and central spout, must be installed. The water container was not filled with drinking water at least up to the descaling symbol . The machine door was not closed.
Problem solving guide Problem Cause and remedy When the machine is switched on, one of these messages appears: Automatic cleaning Automatic cleaning could not be carried out five times. could not be carried out. Start Automatic cleaning (duration min.) now? Otherwise Automatic cleaning will be permanently switched off Or: Automatic maintenance could not be carried out. Carry out the Automatic cleaning part of the Automatic maintenance programme (duration min.
Problem solving guide Unsatisfactory results Problem Cause and remedy The coffee is not hot enough. The cup has not been pre-heated. The smaller the cup and the thicker its sides, the more important it is to pre-heat it. Pre-heat the cup, for example, with hot water. The brewing temperature has been set too low. Set a higher brewing temperature. The filters in the brew unit are blocked. Remove the brew unit and clean by hand Degrease the brew unit.
Problem solving guide Problem Cause and remedy The coffee tastes weak. The coffee grounds in the waste container are sludgy and grainy. Less coffee is being brewed because insufficient coffee beans are getting into the grinder. Have you used a dark roast? This type of coffee bean is often more oily. These oils can cling to the inside of the bean containers and hinder the flow of beans.
Problem solving guide Problem Cause and remedy Coffee drinks trickle/ The brew unit is blocked because the coffee machine dribble slowly out of the has been used very intensively. And/or the brew unit central spout. has not been regularly removed and cleaned by hand. If a cleaning cartridge is fitted, start by switching off Automatic cleaning (Settings | Automatic cleaning).
After sales service and warranty Contact in the event of a fault Warranty In the event of any faults which you cannot remedy yourself, please contact your Miele dealer or the Miele Customer Service Department. For information on the appliance warranty specific to your country please contact Miele. See back cover for address. You can book a Miele Customer Service Department call-out online at www.miele.com/service.
Accessories These products and other useful accessories can be ordered via the Miele webshop, from Miele (see back cover for contact details) or from your Miele dealer. - Microfibre cloth for removing finger marks and light soiling Items supplied will vary depending on appliance and country. To find out which accessories and cleaning and care products are available in your country, please go to the website or contact the Miele Customer Service Department or your Miele supplier.
*INSTALLATION* Installation Mains water connection Risk of injury and appliance damage if appliance is not connected properly. Failing to connect the appliance properly can result in personal injury and/or material damage. The appliance may only be connected to the mains water connection by suitably qualified specialists. Risk to health and risk of damage due to contaminated water.
*INSTALLATION* Installation Ensure that the threaded union is properly connected and does not leak. You can now continue installing the coffee machine. Connecting the water supply Disconnect the coffee machine from the mains power supply before connecting it to the water line. Close the water supply before connecting the coffee machine to the water line. Make sure that the stopcock remains accessible after the appliance has been installed.
*INSTALLATION* Installation Electrical connection Before connecting the coffee machine, make sure that the connection data on the data plate (voltage and frequency) matches that of the electricity supply. This data must correspond in order to avoid the risk of damage to the coffee machine. If in any doubt, consult a qualified electrician. The necessary connection data is given on the data plate inside your appliance. The fuse rating must be at least 10 A.
*INSTALLATION* Installation Building-in dimensions Installation in a tall unit A minimum installation height of 850 mm must be observed. All dimensions are given in mm. The machine can be combined with other Miele built-in appliances. In this case, there must be a full-width, closed shelf between them. If the machine is to be combined with a suitable built-in crockery/food-warming drawer, no shelf is required in between.
*INSTALLATION* Installation Installation and connections All dimensions are given in mm.
*INSTALLATION* Installation Building in the coffee machine Danger of injury due to incorrect operation. A machine that has not been built in is not safe and can cause injuries. Do not operate the coffee machine unless it has been built in. Danger of damage due to incorrect operation. If the ambient temperature range is not observed, the coffee machine may not function properly. The coffee machine may only be operated within an ambient temperature range of +16 °C to +38 °C.
*INSTALLATION* Installation Now screw the coffee machine to the furniture unit. Open the machine door. Two TX20 (25 mm) screws are included with the machine. Secure the coffee machine to the side walls of the furniture unit using the screws supplied. Tighten both screws by hand. The door opening limiters can be removed, allowing you to increase the opening angle to approx. 170°. This makes it easier to remove the bean containers, for example.
Technical data Electricity consumption in standby: < 1.0 W Electricity consumption in networked standby: < 1.4 W Frequency band of the WiFi module 2.4000 GHz – 2.
EU Conformity declaration Miele hereby declares that this coffee machine complies with Directive 2014/53/EU. The complete text of the EU declaration of conformity is available from one of the following internet addresses: - Products, Download from www.miele.ie - For service, information, operating instructions etc: go to www.miele.ie/ domestic/customerinformation-385.
UK Conformity declaration Miele hereby declares that this coffee machine complies with UK Radio Equipment Regulations 2017, as amended. The complete text of the UK declaration of conformity is available from one of the following internet addresses: - Products, Download from www.miele.co.uk - For service, information, operating instructions etc: go to www.miele.co.
Copyrights and Licences Miele uses their own and third party software which is not subject to any so-called Open Source Licence for the operation and control of the appliance. This software/ these software components are protected by copyright. The copyright powers of Miele and third parties have to be respected. Furthermore, this appliance contains software components which are distributed under Open Source licence conditions.
United Kingdom Miele Co. Ltd., Fairacres, Marcham Road, Abingdon, Oxon, OX14 1TW Tel: 0330 160 6600, Internet: www.miele.co.uk/service, E-mail: info@miele.co.uk Australia Miele Australia Pty. Ltd. ACN 005 635 398 ABN 96 005 635 398 Level 4, 141 Camberwell Road Hawthorn East, VIC 3123 Tel: 1300 464 353 Internet: www.miele.com.au China Mainland Miele Electrical Appliances Co., Ltd. 1-3 Floor, No.
CVA 7845 en-GB M.-Nr.
