Operating instructions/Installation instructions

Cleaning and care
76
Cleaning the milk pipework with the
cleaning agent for milk pipework
(sticks)
If automatic cleaning is switched off,
the milk pipework must be cleaned after
15days at the latest. Messages appear
in the display to prompt you to clean.
For optimum cleaning results, we
recommend Miele cleaning agent for
milk pipework.
The cleaning agent for milk pipework
has been specially developed for use
with Miele coffee machines and
prevents subsequent damage.
For each cleaning process, you will
need 2sticks of the cleaning agent for
milk pipework.
You can order the cleaning agent for
milk pipework via the Miele webshop,
the Miele Customer Service Department
(see the end of this booklet for contact
details) or from your Miele dealer.
Clean the milk pipework will appear in the
display.
 Confirm the message withOK.
 Follow the instructions in the display.
When Fill water container with lukewarm
water and cleaning agent up to the 
symbol and replace it. Close the door
appears in the display, proceed as
follows.
Preparing the cleaning solution
 Open 2sticks of the cleaning agent
for milk pipework and empty the
contents into the water container.
 Fill the water container to the
mark with lukewarm water and stir
the solution.
Follow the instructions for the mixing
ratio carefully. Do not fill the water
container with too little water.
Otherwise, cleaning will be
incomplete.
 Replace the water container in the
coffee machine and close the
machine door.
 Follow the instructions in the display.
 If prompted to do so in the display,
rinse the water container thoroughly
with clean water. Make sure that no
cleaning agent is left in the water
container. Fill the water container with
fresh drinking water.
The cleaning process is finished when
Process finished appears in the display.