Operating instructions/Installation instructions

Cleaning and care
69
 Press the latches on the left and
right-hand sides of the milk valve
holder and pull the holder forwards to
remove it.
 Take the holder and silicone seal
apart.
 Pull the stainless steel bolt upwards
and out.
 Clean the individual components of
the milk valve in the dishwasher.
Tip: If there are any dry milk residues
on the front, soak the stainless steel
bolt in warm water and a little washing-
up liquid.
Fitting the milk valve
 Insert the stainless steel bolt from
above.
 Insert the silicone seal into the milk
valve holder.
 Insert the holder and silicone seal
until they audibly click into place.