Operating instructions/Installation instructions

Before using for the first time
26
 Pull the descaling cartridge holder
forwards.
 Fit the descaling cartridge and push it
upwards as far as it will go.
 Slide the descaling cartridge holder
back into place.
 Put the maintenance container back
inside the coffee machine and close
the appliance door.
The descaling cartridge will fill with
water the next time the machine is
switched off.
Always wait for the coffee machine
to switch itself off. Do not force the
machine to switch off.
Once the cleaning and descaling
cartridges have been fitted, a message
will appear regarding the current start
time set for automatic cleaning and
descaling.
 If you want to change the start time,
touch Timer and select the required
time.
 Confirm withOK.
You can also adjust the start time for
automatic cleaning and descaling at a
later point.
Selecting the Performance mode
You can select the appropriate mode to
suit your personal preferences (see
“Settings – Performance mode”).
- Eco mode: This is an energy-saving
mode.
- Barista mode: This mode has been
optimised for unadulterated coffee
enjoyment.
- Latte mode: In this mode, milk-
based drinks can be prepared within
a much shorter space of time.
 Select the mode you want.
The coffee machine is now successfully
set up for use. You can now fill the bean
system.
Setting up the bean system
After setting up the coffee machine, you
will be prompted to set up the bean
system. The coffee machine will assist
you when first filling and naming the
bean containers.
 TouchYes.
If you select No, the assistant for
setting up the bean system will not be
shown again.
Filling the bean containers
The coffee machine has 2bean
container drawers on the top left and
right.
 Open the machine door.