Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Guide to the machine
- Operation
- Miele@home
- Before using for the first time
- Bean system
- Filling the water container
- Switching on and off
- Spout adjustment
- Making drinks
- Expert mode
- Grinder setting
- Parameters
- Portion size
- Resetting drinks
- Profiles
- Profiles: creating and editing drinks
- MyMiele
- MobileStart
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Cleaning by hand or in the dishwasher
- Unsuitable cleaning agents
- Cleaning the drip tray and waste container
- Cleaning the drip tray cover
- Cleaning the water container
- Cleaning the central spout
- Cleaning the cup rim sensor
- Cleaning the milk flask with lid
- Cleaning the milk valve (daily)
- Removing and cleaning the milk valve (once a month)
- Cleaning the bean containers
- Removing the brew unit and cleaning it by hand
- Cleaning the interior, inside of the machine door and drip tray
- Cleaning the front of the machine
- Maintenance programmes
- Rinsing the machine
- Rinsing the milk pipework
- Maintenance programme:
- Degreasing the brew unit and cleaning the interior
- Descaling the machine
- Automatic cleaning and descaling
- Problem solving guide
- After sales service and warranty
- Accessories
- Installation
- Technical data
- EU Conformity declaration
- UK Conformity declaration
- Copyrights and Licences
Before using for the first time
24
Before using for the first time
Connect the coffee machine to the
electricity supply.
Install the coffee machine by building
it in.
Remove any notices from the
machine.
Remove the protective foil from the
drip tray cover.
Clean the water container, the bean
containers and the central spout.
Have the following to hand (included
with delivery) when setting the machine
up for the first time:
- Miele cleaning cartridge
- Miele descaling cartridge
Switching on for the first time
Touch theOn/Offbutton.
Selecting the display language
Select the desired display language.
You might also be asked for your
location.
The choice of location determines how
the time of day is displayed, e.g. in the
12 or 24-hour format, as well as how
units are displayed and so on.
Setting up the network (Miele@home)
You can connect your coffee machine
to your home WiFi network.
When you start it up for the first time, it
shows the following in the display: Set
up Miele@home?
Tip: You can also choose to set up
Miele@home for your coffee machine at
a later point. In this case, select Skip.
Make sure that your WiFi network
signal is sufficiently strong in the
place where you want to set up your
coffee machine.
Touch Continue.
Select the connection method you
wish to use.
Follow the instructions provided in
the coffee machine display and in the
Miele app.
Connection successfully established will
appear in the display.
Touch Continue to proceed with initial
set-up.
Setting the date
Set the current date and touchOK.
Setting the time of day
Set the current time of day and
touchOK.
If the coffee machine has been
connected to a WiFi network and is
signed into the Miele app, the time will
be synchronised based on the location
setting in the Miele app.
Setting the water hardness level
Contact your local water supplier to
find out your local water hardness
range if necessary.
More information can be found under
“Settings – Water hardness”.
Enter your local water hardness (in
°dH) and confirm withOK.