Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Guide to the machine
- Operation
- Miele@home
- Before using for the first time
- Bean system
- Filling the water container
- Switching on and off
- Spout adjustment
- Making drinks
- Expert mode
- Grinder setting
- Parameters
- Portion size
- Resetting drinks
- Profiles
- Profiles: creating and editing drinks
- MyMiele
- MobileStart
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Cleaning by hand or in the dishwasher
- Unsuitable cleaning agents
- Cleaning the drip tray and waste container
- Cleaning the drip tray cover
- Cleaning the water container
- Cleaning the central spout
- Cleaning the cup rim sensor
- Cleaning the milk flask with lid
- Cleaning the milk valve (daily)
- Removing and cleaning the milk valve (once a month)
- Cleaning the bean containers
- Removing the brew unit and cleaning it by hand
- Cleaning the interior, inside of the machine door and drip tray
- Cleaning the front of the machine
- Maintenance programmes
- Rinsing the machine
- Rinsing the milk pipework
- Maintenance programme:
- Degreasing the brew unit and cleaning the interior
- Descaling the machine
- Automatic cleaning and descaling
- Problem solving guide
- After sales service and warranty
- Accessories
- Installation
- Technical data
- EU Conformity declaration
- UK Conformity declaration
- Copyrights and Licences
Installation
*INSTALLATION*
106
Open the appliance door.
TwoTX20 (25mm) screws are
included with the coffee machine.
Secure the coffee machine to the side
walls of the furniture unit using the
screws supplied. Tighten both screws
by hand.
Tip: To make it easier to attach the
screw on the left, you can remove the
door opening limiters and increase the
door opening angle to approx.170°
(see “Door opening limiters”). Make
sure that there is sufficient space
available and that the appliance door is
not going to hit an adjacent wall.
Carry out a functional check on the
coffee machine.
Door opening limiters
The coffee machine door hinges are
equipped with door opening limiters
that restrict the opening angle of the
machine door to approx.120°. This will
prevent the machine door from hitting
an adjacent wall and being damaged
when opened.
The door opening limiters can be
removed, allowing you to increase the
opening angle to approx.170°. This
makes it easier to remove the bean
containers, for example.
Removing the door opening limiters
Make sure that sufficient space is
available for the larger door opening
angle and that the machine door is
not going to hit an adjacent wall.
Remove the door opening limiters
from the hinges, e.g. by prising them
out with a screwdriver.
The machine door opening angle has
now been increased to approx.170°.