Operating instructions/Installation instructions

Installation
*INSTALLATION*
102
Electrical connection
Before connecting the coffee machine,
make sure that the connection data on
the data plate (voltage and frequency)
matches that of the electricity supply.
This data must correspond in order to
avoid the risk of damage to the coffee
machine. If in any doubt, consult a
qualified electrician.
The necessary connection data is given
on the data plate inside your appliance.
The fuse rating must be at least 10A.
If possible, the socket should remain
easily accessible. If the socket is no
longer accessible after installation, an
additional means of disconnection must
be provided for all poles. Suitable
means of disconnection include
switches with an all-pole contact gap of
at least 3mm. These include circuit
breakers, fuses and contactors
(EN60335).
Do not connect the coffee machine to a
stand-alone inverter. Stand-alone
inverters are used for autonomous
power supply, e.g. a solar power
system. Power surges could trigger the
auto switch off function. This could
damage the electronic module.
The coffee machine must not be used
with “energy saving plugs”. These
reduce the amount of energy supplied
to the appliance, causing it to overheat.