Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Operation
- Miele@home
- Before first use
- The bean system
- Filling the water tank
- Switching on and off
- Dispenser adjustment
- Preparing beverages
- Expert Mode
- Grinder setting
- Parameters
- Portion size
- Resetting drinks
- Profiles
- Profiles: Creating and processing drinks
- MyMiele
- MobileStart
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Cleaning the drip tray and grounds container
- Cleaning the drip-tray cover
- Cleaning the water container
- Cleaning the main dispenser
- Cleaning the cup-rim sensor
- Cleaning the milk flask with lid
- Cleaning the milk valve (daily)
- Removing and cleaning the milk valve (once a month)
- Cleaning the bean containers
- Removing the brew unit and cleaning it by hand
- Cleaning the interior, inside of the machine door, and drip tray
- Cleaning the front of the machine
- Maintenance programs
- Rinsing the machine
- Rinsing the milk pipework
- Maintenance program:
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Automatic cleaning and descaling
- Frequently Asked Questions
- Service and warranty
- Accessories
- Packaging material / Disposal of old machine
- Installation
- FCC Declaration of Conformity
- Copyrights and licenses
Settings
58
You can change the coffee-machine
settings, for example, in the Miele app
when remote control is switched on. To
start making a drink via the app,
MobileStart also needs to be activated.
The remote-control function is switched
on by default.
SuperVision
The SuperVision option appears when
the coffee machine is connected to a
WiFi network.
SuperVision allows you to monitor other
household appliances in the
Miele@home system.
SuperVision display
When SuperVision is on (SuperVision |
On), the symbol appears in the
display.
Standby display
SuperVision is also available in Standby
mode if the time display function is
switched on (Settings | Time | Display | On
or Night dimming).
Appliance list
All household appliances signed in to
the Miele@home system are listed.
You can switch SuperVision on or off for
the signed-in household appliances. If
you switch off SuperVision for a
particular household appliance, any
faults that occur in relation to this
appliance will still be displayed.
You can also switch the audible signal
on or off for the listed household
appliances.
RemoteUpdate
The RemoteUpdate menu option is
only displayed and can only be
selected if the requirements for using
Miele@home have been met.
The RemoteUpdate function allows the
software on your coffee machine to be
updated. If an update is available for
your coffee machine, it will
automatically download it. Updates will
not be installed automatically. They
must be initiated manually.
If you do not install an update, you can
continue to use your coffee machine in
the usual way. However, Miele
recommends installing updates.
Activating/deactivating
The RemoteUpdate function is
activated by default. Available updates
will be downloaded automatically but
will only be installed if you initiate
installation manually.
Deactivate RemoteUpdate if you do not
want any updates to be downloaded
automatically.
Running a RemoteUpdate
Information about the content and
scope of an update is provided in the
Miele app.
A message will appear in your coffee
machine display if a software update is
available.
You can install the update immediately
or postpone this until later. When the
coffee machine is switched on again,
you will be reminded about the update.