Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Guide to the machine
- Controls and indicators
- Operation
- Miele@home
- Before using for the first time
- Filling the coffee bean container
- Filling the water container
- Switching on and off
- Spout adjustment
- Making drinks
- Expert mode
- Grinder setting
- Parameters
- Profiles
- MobileStart
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Cleaning by hand or in the dishwasher
- Unsuitable cleaning agents
- Cleaning the drip tray and waste container
- Cleaning the drip tray cover
- Water container
- Cleaning the central spout
- Cleaning the cup rim sensor
- Cleaning the milk flask with lid
- Cleaning the milk valve (daily)
- Removing and cleaning the milk valve (once a month)
- Cleaning the bean containers
- Removing the brew unit and cleaning it by hand
- Cleaning the interior, inside of the machine door and drip tray
- Cleaning the front of the machine
- Maintenance programmes
- _
- _
- Cleaning the milk pipework
- Degreasing the brew unit and cleaning the interior
- Descaling the machine
- Problem solving guide
- After sales service and warranty
- Accessories
- Installation
- Technical data
- EU Conformity declaration
- UK Conformity declaration
Installation
*INSTALLATION*
83
Ensure that the threaded union is
properly connected and does not
leak.
Connecting the water supply
Disconnect the coffee machine
from the mains power supply before
connecting it to the water line.
Close the water supply before
connecting the coffee machine to the
water line.
Make sure that the stopcock remains
accessible after the appliance has
been installed.
A stopcock with 3/4" thread must be
incorporated when connecting the
coffee machine to the water supply.
Check that a sealing ring is present.
Fit one if necessary.
Connect the stainless steel hose to
the stopcock.
Ensure that it is screwed into position
correctly.
Turn on the water supply stopcock
slowly and check for leaks at the
mains water connection.
Correct the position of the seal and
screw thread if appropriate.
You can now continue installing the
coffee machine.