Operating instructions/Installation instructions

Cleaning and care
64
 Wipe any coffee grounds from the
filters. One filter is located in the
funnel. The other filter can be found
to the left of the funnel.
 Dry the funnel to prevent ground
coffee sticking to it the next time a
coffee is made.
Cleaning the inside of the appliance
 Use your vacuum cleaner to remove
dry coffee grounds.
 Clean the niche of the brew unit with
a damp, clean cloth. Clean the areas
marked in white in the illustration, e.g.
around the drive shaft, especially
well.
Replacing the brew unit
 Proceed in the reverse order: push
the brew unit back into the coffee
machine. Tilt the brew unit forward a
little when doing this.
 Press the button under the handle of
the brew unit and, whilst doing so,
turn the handle backwards.
Tip: If you are unable to turn the brew
unit handle, apply firm pressure to the
sides of the brew unit.
 Push the water container into the
coffee machine.
The process of removing and inserting
the brew unit causes ground coffee to
drop onto the drip tray.
 Remove the drip tray and clean the
lid.
 Push the drip tray back into the
coffee machine and close the
machine door.
Cleaning the interior, inside of
the machine door and drip tray
Clean the interior and front of the
machine as part of the normal cleaning
process. For instance, if you remove the
water container, use this as an
opportunity to clean the area under the
water container at the same time.