Operating instructions/Installation instructions

Table Of Contents
Settings
45
machine from switching itself on
unnecessarily, for example, whilst you
are away on holiday.
The programmed times will, however,
remain in the memory and will be
reactivated when the machine is next
switched back on manually.
If you have set the time to be displayed
while the machine is switched off (Show
| On or Night dimming), the symbol
and the desired switching-on time will
appear in the display 23:59hours
beforehand.
Switch off at
The coffee machine switches off at a
particular time.
In the event of a longer absence, the
programmed times will remain in the
memory and will be reactivated when
the machine is next switched back on
manually.
Switch off after
The coffee machine switches off after a
particular length of time if no sensors
have been pressed.
By default, the coffee machine
switches off after 20minutes.
You can change this to another time of
between 20minutes and 9hours.
TeaTimer
You can use the TeaTimer to start a
minute minder when making tea (see
“Making drinks – TeaTimer”).
Volume
You can set the volume of the buzzer
and keypad tones (segment bar).
The welcome melody that plays when
you touch theOn/Offbutton can be
switched on or off.
Display brightness
You can set the display brightness
(segment bar).
Lighting
You can change the brightness of the
lighting while the coffee machine is
switched on or off.
You can also specify how long the
lighting should stay on for when the
machine is switched off (adjustable
between 15minutes and 9hours).
Info (display information)
You can display the number of drinks
dispensed so far and how many more
can be dispensed until the maintenance
programmes have to be run.
Fresh water
The machine is intended to be plumbed
into the mains water supply. Fresh
water is automatically taken into the
water container when the mains water
connection is on. If it is switched off,
you must fill the water container
manually.
Altitude
If the coffee machine is installed at high
altitudes, the lower air pressure will
cause the water to boil at a lower
temperature. You can set the local
altitude of the machine to ensure that
the correct temperatures are achieved.