Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Guide to the machine
- Controls and indicators
- Operation
- Miele@home
- Before using for the first time
- Filling the coffee bean container
- Filling the water container
- Switching on and off
- Spout adjustment
- Making drinks
- Expert mode
- Grinder setting
- Parameters
- Profiles
- MobileStart
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Cleaning by hand or in the dishwasher
- Unsuitable cleaning agents
- Cleaning the drip tray and waste container
- Cleaning the drip tray cover
- Cleaning the water container
- Cleaning the central spout
- Cleaning the cup rim sensor
- Cleaning the milk flask with lid
- Cleaning the milk valve (daily)
- Removing and cleaning the milk valve (once a month)
- Cleaning the bean containers
- Removing the brew unit and cleaning it by hand
- Cleaning the interior, inside of the machine door and drip tray
- Cleaning the front of the machine
- Maintenance programmes
- _
- _
- Cleaning the milk pipework
- Degreasing the brew unit and cleaning the interior
- Descaling the machine
- Problem solving guide
- After sales service and warranty
- Accessories
- Installation
- Technical data
- EU Conformity declaration
- UK Conformity declaration
Problem solving guide
73
Problem Cause and remedy
F233 The cup rim sensor is not inserted or is incorrectly
inserted.
If the central spout is moving upwards and the cup
rim sensor is bumped, e.g. with a cup, the cup rim
sensor loses its reference position.
Confirm the message withOK.
Refit the cup rim sensor.
Cup rim detection remains inactive and the central
spout stays in the top position until the coffee
machine is next switched on. Cup rim detection is
reinitialised during the next switch-on operation.
F307or Remove the milk
valve and clean it
The milk valve is faulty.
Remove and clean the milk valve (see “Cleaning
and care – Removing and cleaning the milk valve”).