Operating instructions/Installation instructions

Cleaning and care
58
 Open the appliance door.
 Clean the milk valve with a damp
cloth/microfibre cloth.
 Close the appliance door.
Removing and cleaning the
milk valve (once a month)
If the following issues occur during milk
preparation, the milk valve may be
blocked: only hot milk is dispensed
instead of milk froth, the milk sprays
out. Clean the milk valve more often if
necessary.
The milk valve cover should only be
cleaned by hand.
 Open the appliance door.
 Remove the bean container on the
left and the maintenance container.
 Remove the central spout’s stainless
steel cover.
 Remove the milk valve cover: press
on the recessed grip to unlock the
cover.
On the top right-hand side of the
cover, you will find a pin for swivelling
the cover out.
1
2
3
 Detach the milk pipework from the
dispensing unit on the central
spout and from the milk valve
silicone seal( and).
 Remove the milk pipework
connecting the milk valve to the
central spout.
 Disconnect the angular moulded
hose from the round hose. Rinse the
hoses thoroughly under running
water.
Do not remove the connecting pieces
from the hoses.