Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Guide to the machine
- Controls and indicators
- Operation
- Miele@home
- Before using for the first time
- Filling the coffee bean container
- Filling the water container
- Switching on and off
- Spout adjustment
- Making drinks
- Expert mode
- Grinder setting
- Parameters
- Profiles
- MobileStart
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Cleaning by hand or in the dishwasher
- Unsuitable cleaning agents
- Cleaning the drip tray and waste container
- Cleaning the drip tray cover
- Cleaning the water container
- Cleaning the central spout
- Cleaning the cup rim sensor
- Cleaning the milk flask with lid
- Cleaning the milk valve (daily)
- Removing and cleaning the milk valve (once a month)
- Cleaning the bean containers
- Removing the brew unit and cleaning it by hand
- Cleaning the interior, inside of the machine door and drip tray
- Cleaning the front of the machine
- Maintenance programmes
- _
- _
- Cleaning the milk pipework
- Degreasing the brew unit and cleaning the interior
- Descaling the machine
- Problem solving guide
- After sales service and warranty
- Accessories
- Installation
- Technical data
- EU Conformity declaration
- UK Conformity declaration
Parameters
38
Displaying and changing
parameters
You can change the portion size for all
drinks.
In addition, you can set the “Amount of
coffee”, “Brew temperature” and “Pre-
brewing” parameters for each coffee
drink individually.
Touch the sensor.
Select a drink and confirm withOK.
The parameters that can be changed
for this drink are displayed.
Once you have selected a drink, the
current settings for the following
appear: Amount of coffee, Brew
temperature and Pre-brewing.
The Portion size menu option is
displayed in the first line. If you
select Portion size and confirm
withOK, the drink will be dispensed
immediately.
Select the parameter you want.
Change the setting as required and
confirm withOK.
The setting is now saved.
Portion size
The flavour of the coffee produced
depends not only on the type of coffee,
but also on the amount of water used.
You can programme the amount of
water for all drinks (apart from the
Coffee pot function) to suit the size of
your cups and/or the type of coffee you
are using.
For coffee drinks that use milk, you can
not only set the amount of espresso or
coffee but also the amount of milk or
milk froth to be dispensed with these
drinks.
A maximum portion size can be
programmed for each type of drink.
Dispensing stops once this has been
reached. The maximum possible
portion size is then saved by the
machine for this type of drink.
If the water container becomes empty
whilst making a drink, the coffee
machine will stop programming the
portion size. The portion size will not
be saved.
Changing the portion size
Place a cup under the central spout.
Select Portion size and confirm
withOK.
The desired drink will be made and Save
will appear in the display.
When the cup is filled up to the level
you want, touchOK.
If you want to change the portion size
for coffee made with milk, the
ingredients which make up the drink will
be saved one after the other while the
drink is being made.
When the quantity for each ingredient
reaches the level you want, touchOK.
The programmed portion size will now
be dispensed every time that particular
drink is selected.